Products

Diameter: 5" Weight: 23.00lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All...

Diameter: 5 1/2" Weight: 38.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Inside Diameter: 6" Weight: 32.40 lbs Length: 4.800" Outside diameter : 8.700" Whether your boat is sailing in either fresh or sea water is...

Diameter: 6 1/2" Weight: 26.90 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Diameter: 1" Weight: 1.10lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All...

Diameter: 1 1/8" Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Diameter: 1 1/4" Weight: 1.15 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Diameter: 1 3/8" Weight: 1.30 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Diameter: 1 1/2" Weight: 2.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener.  Stainless steel nuts are pressed in, and plastic retaining washers...

Diameter: 1 3/4" Weight: 2.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers ensure...

Diameter: 2" Weight: 3.55 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers...

Trim Tab (00180A) - Transom Anode (00127A)  Hardware: M10-1.25 x 45mm S/S SHCS M6 x 1mm x 25mm S/S Bolt x4 6mm Flat Washer...

Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except...

Yanmar SD20. SD25. SD30. SD40. SD50. and SD60 Saildrives

Length: 3 3/4" Width: 2 3/4" Thickness: 9/16" Weight: 0.55 lbs Center to Center: 1 5/16 Boat Lift Zinc bolt on Anode: This hull...

Length: 6" Width: 3 3/8" Thickness: 1 3/4" Weight: 4.75 lbs OL: 10" These  plate zinc anodes are cut as per dimensions with galvanized...

Length: 114mm Width: 63mm Thickness: 28mm Weight: 2.5 lbs C/C:  40mm

Has 10ft. cable and rubber gasket and clamp WEIGHT: 4.80 Used for Boat Lift and sailing boat  These  plate zinc anodes are cut as...

Length: 8 1/2" Width: 3" Thickness: 1 1/2" Weight: 5.00 lbs OL: 12 1/2 These TZG plate zinc anodes are cut as per dimensions...

Diameter: 98mm Thickness: 32mm Weight: 2.20 lbs

ON SPECIAL REQUEST ONLY VOLUME DISCOUNTS Significant volume discounts are available for this anode. For price quote, please call or email us with your...

Weight : 26 lbs Dimension : 19/4"x (13") x 4 1/2" x 4" with weldable steel tabs. Some in Stock , big volume: ON SPECIAL...

Yamaha Transom Aluminum Anode 6G5-45251-01 Yamaha                                                                                        Outboards  Stainless Steel Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models:...

Length: 8 1/4"Width: 3 15/16"Thickness: 1 1/4"Weight: 8.33 lbsC/C: 4" All of our plate zinc anodes are cut with specified bolt patterns as per...

Yamaha Trim Tab Anode 6K1-45371-00 Yamaha 90-200 HP Outboard Trim Tab Zinc Anode (LH) Yamaha 90-200HP Diameter: 91mm Base Diameter:  3-5/8" Threaded Mounting Hole:  M10 x 1.25mm...

Yamaha 200-300 HP Outboard Fin/Skeg STANDARD  Base Diameter: 4” Threaded Mounting Hole: M10 x 1.25mm 61A-45371-00 Yamaha 200-300 HP Outboard Trim Tab Zinc Anode...

Length: 7 3/4" Width: 4 1/4" Thickness: 1 1/8" Weight: 8.00 lbs Center to Center: 5" slotted (4 1/2 to 6") Whether your boat is...

Zinc with Brass Cap Diameter: 1/2” Length:2" NPT:3/8 Wrench: 11/16"

Diameter: 1/2” Length: 2” Thread: 3/8-16