The Zinc Guy

Machined collar for Furuno System mx54.91mm Call for these New Anodes that are perfect for fishing Furuno

Thickness:  1" Diameter: 5 3/4" Weight: 5.5 lbs All zinc anodes are cut as per dimensions . These boat zincs are undrilled for bolt-on...

Rudders and Trim tabs/ Small Plate Weight: 1.17lb Length: 3.35" C/C: 2"  

Hole Diameter: 10mm Length:  30mm 7/16"UNC  Volvo Penta Diesel Engine Zinc Anode original part #838929 

Stainless Steel Complete Bolts, Washers and Nut set

Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches Diameter (top of cone): 1 inchHeight: 1.5 inches

Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8” Used for CMC Thrusters .

Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...

Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...

Height: 5 1/2"  Bottom Diameter: 3 1/2" Top Diameter: 2 1/2"  For Azimut yachts 

PROP NUT Weight:  12lbs Inside Height: 60mm I/D:  85mmO/D:  120mm

Diameter: 150mm Height: 104mm Weight: 18.50

Length: 100mm Width: 52mm Thickness: 22mm Weight: 1.5 lbs

Azimut Strainer Zinc Anodes Length: 130mm. -Width: 50mm.  -Thickness: 18mm.  Weight: 1.5 lbs

Length: 114mm Width: 63mm Thickness: 28mm Weight: 2.5 lbs C/C:  1 1/2" slotted

Diameter: 230mm/9.05" Height: 64mm/2.5" Weight: 47.50lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on attachment....

Diameter: 162mm Height: 89mm Weight: 34 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled bolt-on attachment. Whether...

Diameter: 240mm Height: 89mm Weight: 34 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...

Used to prevent corrosion for your sailing boats. Height: 4" (10.16cm) Top Diameter: 2.5" (6.35cm) Bottom Diameter: 3.25" (8.255cm)

Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts,Feadship,  Oyster Sailboats, Fairline(same as...

Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...

Length: 17 5/8” Width: 3 3/4” Thickness 1 5/8” C/C: 9” hole 5/8" x1" Weight: 17lbs Transom, hull Zinc Anode used on Sunseekeer and...

Italian CM Thruster for a 300mm bronze prop,  Used for Mangusta and Other European Vessels     

Zinc with Brass Cap Diameter: 1/4" Length: 2" NPT: 1/8 Wrench: 7/16"

Diameter:1/4” Length: 2” Thread: 1/4 - 20

Zinc with Brass Cap Diameter: 3/8” Length:1 3/4" NPT:1/4 Wrench: 9/16"

Diameter: 3/8” Length:1 3/4" Thread: 5/16-18

Diameter: 5/8” Length: 2” Thread: 7/16-14

Zinc with Brass Cap Diameter: 3/4" Length: 2"NPT: 3/4 Wrench:1 1/16"

Diameter: 3/4” Length: 2” Thread: 1/2-13

Zinc with Brass Cap Diameter: 3/4" Length: 3 3/8" NPT: 3/4 Wrench: 1 1/16"

Diameter: 3/4” Length: 3 3/8” Thread: 1/2-13