Azimut Zinc Anodes
The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s Azimut zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Diameter: 3 11/16" Weight: 1.70 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Diameter: 4 9/32"Weight: 2.45 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Diameter: 5 1/16" Weight: 3.55 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Length: 5 7/8" Width: 2 1/4" Thickness: 1" Weight: 2.40 lbs Center to Center: 3 1/8" or 80mm Trim Tab Used in Azimut and...
Diameter: 1 29/32" Height: 1 21/32" Weight: 0.65 lbs Bow and stern Vetus thruster Used in Azimut and Ferretti Yachts side power thrusters Our...
Thickness: 1 1/2"Diameter: 5 3/4"Weight: 8.80 lbs Used in Feadship, Azimut, Riva, Atlantis, Cranchi Ferretti Yachts. Whether your boat is sailing in either fresh...
Diameter: 2 15/16" Weight: 1.05 lbs Used in Azimut Yachts Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Diameter: 125mm (4.9") Thickness: 21mm (0.8") Hole Diameter: 11mm (0.4") Countersink Diameter: 30mm (1.1") Weight: 1.0kg (2.2 lbs) Streamlined hull anode for Azimut yachts, models AZ39, AZ40, AZ42, AZ46,...
Diameter: 3 1/4" Height: 3 7/8" Weight: 4.25 lbs Used in Azimut Yachts, Atlantis, Cranchi. Our nut zinc anodes are precision machined to fit...
Thickness: 1" Diameter: 4 15/16" Weight: 4.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Thickness: 2" Diameter: 5 1/2" Weight: 11.50 lbs Used in Azimut and San Lorenzo yachts. Threaded inside with Plastic Cap. Whether your boat is...
Height: 29/32" Diameter: 1 3/4" Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined...
Diameter: 5 1/16" Weight: 5.10 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts,Feadship, Oyster Sailboats, Fairline(same as...
Diameter: 1 7/8" Weight: 0.25 lbs Used in Azimut Yachts Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Length: 10 1/2" Width: 3" Thickness: 1" Weight: 6.00 lbs C/C: 5 1/2" or 140mm Our plate anodes are cut with specified bolt patterns...
Diameter: 6 1/2" Weight: 9.70 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our nut zinc anodes are precision machined...
Thickness: 1"Diameter: 8 3/4"Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi , Feadship Whether your boat is sailing...
Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Thickness: 3/4" Diameter: 2 25/32" Weight: 0.85 lbs Used in Azimut Yachts and TWIN DISC DRIVES. Very special rudder Zinc for Sunseeeker and European...
Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...
Height: 1" Diameter: 4 7/8" Weight: 4.80 lbs Used for: Azimut 68-S propeller cap Whether your boat is sailing in either fresh or sea...
Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Length: 9 1/4" Width: 2 1/2" Thickness: 1" Weight: 4.80 lbs Center to Center: 5 1/2" or 140mm Used in Azimut Yachts. Whether your...
Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Height: 3 1/2" Diameter: 7 7/8" Weight: 22 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water...
Thickness: 1" Diameter: 6 5/8" Weight: 7.80 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Length: 12" Weight: 7.80 lbs Center to Center: 6" Used for Azimut and Atlantis yachts All Zimar plate zinc anodes are cut with specified...
Height: 1" Diameter: 5 1/2" Weight: 5.80 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...
Length: 10 1/2" Width: 3" Thickness: 1" Weight: 6.00 lbs C/C: 5 1/2" or 140mm Our plate anodes are cut with specified bolt patterns...