No products in the cart.
Other Zinc Anodes / Parts
Miami-Dade & Broward Counties
The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Sale
10 ft. Cable Dimensions: 165mmx59mmx26mm Weight: 2.90 lbs/ 1.3 kilos ZNGUY 1 Small Boat lift zinc anode with 304 STAINLESS STEEL CABLE . Whether...
Sale
10 ft. with stainless steel Cable 304 Dimensions:274mm x 85mm x 36mm Weight: 11.00 lbs ZNGUY 5 take care of your lift ,whether your boat is...
Sale
10 ft. with stainless steel Cable 304 Dimensions:218mm x 68mm x 32mm Weight: 6.50 lbs ZNGUY 3 Whether your boat is sailing in either fresh...
Sale
Length: 6" Width: 2 3/4" Thickness: 7/8" Weight: 2.75 lbs Center to Center: 3" Ferretti Trim Tab, ZHC 3 Our plate zinc anodes are...
Sale
Length: 12" Width: 6" Thickness: 1 1/4" Weight: 23.00 lbs Center to Center: 6 " Slotted Hole: 1 1/4" ZHC-23 slotted 4 1/2"-7" /...
Sale
Length: 12 1/8" Width: 3" Thickness: 1 1/4" Weight: 11.57 lbs OL: 16" VOLUME DISCOUNTS Significant volume discounts are available for this anode. For...
Sale
Thickness: 2" Diameter: 5 1/2" Weight: 11.50 lbs Used in Azimut and San Lorenzo yachts Whether your boat is sailing in either fresh or...
Sale
Zinc with Brass Cap Diameter: 5/8" Length: 2"NPT: 1/2 Wrench:7/8"
Sale
Length: 15" Width: 3" Thickness: 1" Weight: 6.00 lbs C/C: 5 1/2" or 140mm Our plate anodes are cut with specified bolt patterns as...
Sale
Diameter: 3/4" Weight: 2.70 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Small Tear Drop Zinc Anode Length: 5 1/4” Width: 2” Thickness: 7/8” C/C: 1 5/8” Hole Diameter: 1/4”
Sale
Small Tear Drop Zinc Anode Length: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Sale
Diameter: 100mm
Thickness: 45mm
Weight: 5.50 lbs
Used for San Lorenzo yachts, come in pair or single ( half price) with hardware.
Sale
Various outboards from 40HP to V6 135/150/175 Verado - Mercury Engine Anodes -
Length: 7.68” Width: 2.05” Thickness: .47” - Weight: 1.477 lbs
Sale
Diameter: 1" Length : 24" Weight: 4.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Mercury / Mariner 35-300hp 2 each engine - Mercury Engine Anodes - Length: 3.03” Width: 1.18” Thickness: .87” (.47” smaller side’s height) - Weight:...
Sale
$59.99$21.65
Trim Tab (00180A) - Transom Anode (00127A) Hardware: M10-1.25 x 45mm S/S SHCS M6 x 1mm x 25mm S/S Bolt x4 6mm Flat Washer...
Sale
Diameter: 1" Height: 1 1/4" Weight: 0.22 lbs USED FOR: TWIN DISK/COOLING SYSTEM P/N 163760 All barrot zinc anodes are made and cut as...
Sale
Diameter: 1 1/4" Length : 24" Weight: 7.50 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Sale
Volvo Penta split collar for saildrive with hardware Outside Diameter: 4"Inside Diameter: 1-3/4"Weight: 3.4 lbs This anode fits all Volvo Penta 130/150 saildrives, including 2017 and later...
Sale
Diameter: 2" Length : 24" Weight: 20.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Diameter: 1 3/4" Length : 24" Weight: 14.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Sale
Diameter: 98mm
Thickness: 32mm
Weight: 2.20 lbs
Sale
35HP and above - Mercury Engine Anodes - trim tabs
Length: 3.74” Width: 3.74” Thickness: 2.60” - Weight: 1.003 lbs
Sale
Honda BF 75-130Hp - Honda Engine Anodes -
41107-ZW1-B01-ZA Honda Outboard Trim Tab Zinc Anode
Diameter: 4-1/2"
Height: 2-1/2"Hole Diameter: 3/8"Weight: 0.9 lbs
Sale
E.B. - F.B. 55 HP - BRP (Omc / Johnson / Evinrude) Engine Anodes - Skeg zinc anode Length: 5.12” Width: 4.33” Thickness: 2.87”...
Sale
Length: 4 3/8" Width: 1 3/4" Thickness: 15/16" Weight: 1.35 lbs Center to Center: 5 1/2" Used in Submarine applications and water pumps in...
Sale
Has 10ft. cable and rubber gasket and clamp WEIGHT: 4.80 Used for Boat Lift and sailing boat These plate zinc anodes are cut as...
Sale
San Lorenzo Rudder Zinc Anodes
Length: 189mm. -Width: 50mm. -Thickness: 25mm
C/C: 120mm -Weight: 3.5 lbs
Sale
$4.41$3.21
Honda BF 2-100Hp 1997 & Older - Honda Engine Anodes - Length: 2.36” Width: .91” Thickness: .47” - Weight: .165 lbs 41106-935-812 Honda Outboard...
Sale
Length: 7 1/2" Width: 3" Thickness: 1 1/4" Weight: 6.30 lbs C/C: 3" HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans All Zimar...
Sale
Length: 12" Weight: 7.80 lbs Center to Center: 6" Used for Azimut and Atlantis yachts All Zimar plate zinc anodes are cut with specified...
About Us
