No products in the cart.
Nut Zinc Anodes
Zimar nut zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar nut zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Sale
Diameter: 1 29/32"Height: 1 21/32"Weight: 0.65 lbs Bow and stern Vetus thruster, Side Power Used in Azimut and Ferretti Yachts side power thrusters Our...
Sale
Diameter: 3 1/4" Height: 3 7/8" Weight: 4.25 lbs Used in Azimut Yachts, Atlantis, Cranchi. Our nut zinc anodes are precision machined to fit...
Sale
Height: 29/32"Diameter: 1 3/4"Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined to fit...
Sale
Diameter: 1" Height: 1 1/4" Weight: 0.22 lbs H.E. PLUG1/ #178369AM Heat exchanger zinc anode Marine transmission solution TWIN DISC/COOLING SYSTEM P/N 163760 Used...
Sale
Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our nut zinc anodes are precision machined...
Sale
Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...
Sale
Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...
Sale
Height: 2"Diameter: 2 7/8"Weight: 3.00 lbs These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes are...
Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8”
Used for CMC Thrusters .
Sale
Height: 1 21/32" Diameter: 2 25/64" Weight: 1.10 lbs Vetus thruster Zinc anode Zinc anode for bow thruster models 125, 130 and 160. Mounting...
Diameter: 2" Height: 1-1/4" Weight: 0.60 lbs Fits Quick BTQ/BTR thrusters with 185mm diameter tunnel. Sold individually. Most thrusters require two of these anodes. Measures 20mm across...
Sale
Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...
Sale
Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches
Diameter (top of cone): 1 inchHeight: 1.5 inches
Sale
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
Height: 3 1/2" Diameter: 2 5/16" Weight: 2.50 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
Diameter: 1 1/4"Height: 3/4"Weight: 0.22 lbs USED FOR: SEA REX All plate zinc anodes are cut as per dimensions . These plate boat zincs...
Sale
Height: 1 3/8" Dimension: 2 5/8" Weight: 3.00 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER Our cone zinc anodes are cut as per...
Sale
Center to Center: 1 3/4" Height: 1 3/8" Diameter: 2 5/8" Weight: 1.60 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc...
Sale
Diameter: 5 3/4" Inside Diameter :128mmThickness: 2"Weight: 11.00 lbs USED FOR: BENETTI 93' Out plate zinc anodes are cut as per dimensions . These...
Sale
Height: 2 9/16" Dimension: 1 7/8" Weight: 1.20 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
Height: 3 9/16" Diameter: 6 1/8"Weight: 25.00 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over specific...
Sale
Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs
Used for propeller nut on San Lorenzo 95ft
Sale
Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs Hole C/C: 3" USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are...
Sale
Height: 3 1/2" Diameter: 2 7/8"Weight: 4.80 lbs USED FOR: FERRETTI/RIVA 50,52,56 All CONE zinc anodes are cut as per dimensions . These boat...
Sale
Height: 3 1/2"Weight: 15.00 lbsDiameter: 5 1/2" These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes...
Sale
Used to prevent corrosion for your sailing boats.
Height: 4" (10.16cm)
Top Diameter: 2.5" (6.35cm)
Bottom Diameter: 3.25" (8.255cm)
Sale
Diameter: 7 1/2" Inside Diameter: 6.3" 160MMThickness: 2 3/4"Weight: 30 lbs Used in Benetti Yachts. Whether your boat is sailing in either fresh...
Sale
Height: 1 3/4" Diameter: 7" Weight: 18 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Diameter: 6 3/8" Thickness: 2" Weight: 14.80 lbs Used in Benetti Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Diameter: 277/8" Thickness: 3" Weight: 35.00 lbs USED FOR: BENETTI All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate...
Sale
Height: 5 1/8" Diameter: 9 7/16" Weight: 45.00 lbs
San Lorenzo 108' motor yacht propeller nut custom made
About Us
