Ferretti Zinc Anodes



The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Length: 5 7/8"Width: 2 1/4"Thickness: 1"Weight: 2.40 lbsCenter to Center: 3 1/8" or 80mm and slotted Trim Tab, Rolls Royce Engine Used in Azimut...
Diameter: 1 29/32"Height: 1 21/32"Weight: 0.65 lbs Bow and stern Vetus thruster, Side Power Used in Azimut and Ferretti Yachts side power thrusters Our...
Thickness: 1 1/2"Diameter: 5 3/4"Weight: 8.80 lbs Used in Feadship, Azimut, Riva, Atlantis, Cranchi and Ferretti Yachts. Whether your boat is sailing in either...
Thickness: 1"Diameter: 4 15/16"Weight: 4.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Height: 29/32"Diameter: 1 3/4"Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined to fit...
Special Transom Zinc Anode
Weight: 2.5 lbs
Length: 228mm -Width: 32mm -Thickness: 25mm
Center to center hole 150mm
Length: 7 3/4" Width: 2 1/2"Thickness: 1 1/4"Weight: 5.20 lbsCenter to Center: 9" OL: 11" Used in Ferretti Yachts. All our zinc anodes are cut...
Length: 7 3/4" Width: 3"Thickness: 1 3/8"Weight: 7.20 lbsCenter to Center: 10" OL: 11 3/4" Used in Feretti Yachts. All our zinc anodes are...
DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Thickness: 1"Diameter: 8 3/4"Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi , Feadship Whether your boat is sailing...
Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...
DIAMETER: 80mm Weight: 7.20 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Length: 4 3/8" Width: 1 3/4" Thickness: 15/16" Weight: 1.35 lbs Center to Center: 5 1/2" Used in Submarine applications and water pumps in...
Thickness: 1"Diameter: 6 5/8"Weight: 7.80 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea water is...
Height: 3 1/2" Diameter: 2 5/16" Weight: 2.50 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Height: 2 9/16" Dimension: 1 7/8" Weight: 1.20 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
DIAMETER: 90mm Weight: 9.00 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Height: 3 9/16" Diameter: 6 1/8"Weight: 25.00 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over specific...
Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 7" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...
Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 5" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...
Thickness: 2 5/8"Diameter: 6 3/4"Weight: 22.80 lbs Used in Azimut and Ferretti Yachts and other European megayachts. Whether your boat is sailing in either...
Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs are pre-drilled for...
Length: 12" Width: 6 1/2"Thickness: 1 1/4"Weight: 18.20 lbs C/C: 6" Used in Ferretti, Mangusta Yachts, Transom All plate zinc anodes are cut with...
Height: 6 1/2" Diameter: 8"Weight: 61.00 lbs Used in Ferretti Yachts. These nut zinc anodes are precision machined to fit over specific nut configurations...
Showing: 1 -25 of 25
