Propulsion Propellers

Propulsion Propellers

The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.

Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.

The Zinc Guy’s zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.

Propulsion Propellers

Sale
AS-60 Nut Zinc Anodes
$113.22$54.99
Diameter: 3 1/4" Height: 3 7/8" Weight: 4.25 lbs Used in Azimut Yachts, Atlantis, Cranchi. Our nut zinc anodes are precision machined to fit...
Sale
VP-EL IPS Drive Zinc Anode
$67.62$39.90
Diameter: 1 15/16" Height: 2 3/4" Weight: 1.80 lbs Used for Volvo Penta IPS drive foot Whether your boat is sailing in either fresh...
$55.99
Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8” Used for CMC Thrusters .
Sale
FE-80 Propeller Zinc Cones with or without screws
Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...
Sale
AS-55 Nut Zinc Anodes
$95.36$59.99
Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...
Sale
AS-100
$299.60$83.99
Length: 3 3/4" Height: 3 3/4" Dimension: 95mm x95mm Width: 5.60 lbs Used For: AZIMUT (70, 72) All plate zinc anodes are cut as...
Sale
AS-50 Nut Zinc Anodes
$75.30$49.42
Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
AS-45 Nut Zinc Anodes
$62.58$39.42
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
AZ-105 Propeller Zinc Anode
$1,170.00$599.00
Height: 3 1/2" Diameter: 7 7/8" Weight: 22 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water...
Sale
NO. 8 Westport Propeller Zinc Anode
$1,083.00$156.00
Inside Diameter: 5" Outside Diameter: 6.5" Height: 5.5" Weight: 18.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
NO.7 Westport Propeller Zinc Anode
$1,083.00$184.00
Inside Diameter: 5" Outside Diameter: 6" Height: 6" Weight: 14.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
BNTT-93PN
$384.76$199.38
Diameter: 5 3/4" Thickness: 2" Weight: 11.00 lbs USED FOR: BENETTI 93' Out plate zinc anodes are cut as per dimensions . These Zimar...
Sale
NO. 10 Westport Propeller Zinc Anode
$2,363.00$399.50
Inside Diameter: 6 1/2" Outside Diameter: 7 1/2" Height: 7 1/2" Weight: 30 FOR: WESTPORT 130L , 40 Meters Our propeller zinc anodes are cut as per...
Sale
SL-95 San Lorenzo
$1,320.50$690.25
Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs Used for propeller nut on San Lorenzo 95ft
Sale
NO. 9 Westport Propeller Zinc Anode
$1,528.00$189.00
Inside Diameter: 6" Outside Diameter: 7.06" Height: 6 3/8" Weight: 22 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
BT-60 Cone Zinc Anode
$118.00$59.00
Used to prevent corrosion for your sailing boats. Height: 4" (10.16cm) Top Diameter: 2.5" (6.35cm) Bottom Diameter: 3.25" (8.255cm)
Sale
BNTT-120PN Benetti Propeller Zinc Anode
$541.68$357.92
  Diameter: 7 1/2"  Inside Diameter: 6.3" Thickness: 2 3/4" Weight: 30 lbs Used in Benetti Yachts. Whether your boat is sailing in either...
Sale
AZ-75 Propeller Zinc Anode
$970.00$495.00
Height: 1 3/4" Diameter: 7" Weight: 18 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
BNTT-150PN
$764.50$422.25
Diameter: 277/8" Thickness: 3" Weight: 35.00 lbs USED FOR: BENETTI All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate...
Sale
RV-72 Nut Zinc Anode
$550.00$385.00
Height: 3 7/8" Diameter: 5 1/2" Weight: 18.80 lbs These Zimar nut zinc anodes are precision machined to fit over specific nut configurations and...
Sale
RV-80 Nut Zinc Anode
$833.82$299.60
Height: 4" Diameter: 6 3/4" Weight: 29.80 lbs These Zimar nut zinc anodes are precision machined to fit over specific nut configurations and models....
Height: 5 1/8" Diameter: 9 7/16" Weight: 45.00 lbs Used in 108 106  San Lorenzo Yachts. Whether your boat is sailing in either fresh...
Sale
SL-72 San Lorenzo
$278.00$159.00
Height: 7/8" Diameter: 5 3/8" Weight: 4.40 lbs USED FOR: SAN LORENZO 72 All Zimar plate zinc anodes are cut as per dimensions ....
Sale
SL-88/120 San Lorenzo
$403.10$241.55
Height: 1" Diameter: 6 3/4" Weight: 8.20 lbs USED FOR: SAN LORENZO All Zimar plate zinc anodes are cut as per dimensions . These...
$113.22$54.99
$67.62$39.90
$55.99
$873.82$390.00
$95.36$59.99
$299.60$83.99
$75.30$49.42
$62.58$39.42
$1,170.00$599.00
$1,083.00$156.00
$1,083.00$184.00
$384.76$199.38
$2,363.00$399.50
$1,320.50$690.25
$1,528.00$189.00
$118.00$59.00
$541.68$357.92
$970.00$495.00
$764.50$422.25
$550.00$385.00
$833.82$299.60
$278.00$159.00
$403.10$241.55
Showing: 1 -24 of 24
Spinner