Hull Boat Zinc Anodes



Our hull boat zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
They meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Length: 12" Width: 6" Thickness: 1/2" Weight: 7.53 lbs Diver Plate Transom Zinc Anode. All late zinc anodes are cut with specified bolt patterns...
Length: 5 7/8" Width: 2 1/4" Thickness: 1" Weight: 2.40 lbs Center to Center: 3 1/8" or 80mm Trim Tab Used in Azimut and...
Thickness: 1 1/2" Diameter: 5 3/4" Weight: 8.80 lbs Used in Azimut, Riva, Atlantis, Cranchi Ferretti Yachts. Whether your boat is sailing in either...
Length: 6" Width: 2 3/4" Thickness: 1 1/4" Weight: 2.75 lbs Center to Center: 3" Ferretti Trim Tab, ZHC 3 Our plate zinc anodes...
Diameter: 125mm (4.9") Thickness: 21mm (0.8") Hole Diameter: 11mm (0.4") Countersink Diameter: 30mm (1.1") Weight: 1.0kg (2.2 lbs) Streamlined hull anode for Azimut yachts, models AZ39, AZ40, AZ42, AZ46,...
Length: 17 5/8” Width: 3 3/4” Thickness 1 5/8” C/C: 9” hole 5/8" x1" Weight: 17lbs Transom, hull Zinc Anode used on Sunseekeer and...
Length: 12" Width: 6" Thickness: 1 1/4" Weight: 23.00 lbs Center to Center: 6 " Slotted Hole: 1 1/4" ZHC-23 slotted 4 1/2"-7" /...
Length: 12 1/8" Width: 3" Thickness: 1 1/4" Weight: 11.57 lbs OL: 16" VOLUME DISCOUNTS Significant volume discounts are available for this anode. For...
Thickness: 1" Diameter: 4 15/16" Weight: 4.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Thickness: 2" Diameter: 5 1/2" Weight: 11.50 lbs Used in Azimut and San Lorenzo yachts. Threaded inside with Plastic Cap. Whether your boat is...
Length: 7 3/4" Width: 4 1/4" Thickness: 1 1/8" Weight: 8.00 lbs Center to Center: 5" slotted (4 1/2 to 6") Whether your boat is...
Length: 12" Width: 6" Thickness: 1 1/8" Weight: 14.80 lbs Transom Zinc Anode. All Zimar plate zinc anodes are cut with specified bolt patterns...
Length: 12 1/8" Width: 3" Thickness: 1 1/4" Weight: 11.57 lbs Center to Center: 14 3/8" OL: 16" with Slotted Strap. These plate zinc...
Diameter: 2 15/16" Weight: 0.48 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Length: 12" Width: 6" Thickness: 1" 1/4" Weight: 22.50 lbs OW: 10" ZHS 23 VOLUME DISCOUNTS Significant volume discounts are available for this anode....
Length: 3 3/4" Width: 2 3/4" Thickness: 9/16" Weight: 0.55 lbs Center to Center: 1 5/16 Boat Lift Zinc bolt on Anode: This hull...
Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 12lbs Used on Sunseekeer and Princess Yachts, Oyster Sailboats, Fairline(same as...
Small Tear Drop Zinc Anode w/custom slotLength: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Thickness: 1" Diameter: 8 3/4" Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi . Whether your boat is...
Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Length: 7" Width: 1 15/16" Thickness: 1 1/2" Weight: 4.20 lbs Center to Center: 5"/130mm Arnesson drive bar for Pershing yachts Whether your boat...
Length: 9 1/4" Width: 2 1/2" Thickness: 1" Weight: 4.80 lbs Center to Center: 5 1/2" or 140mm Used in Azimut Yachts. Whether your...
Length: 12" Width: 6" Thickness: 1 1/4" Weight: 23.00 lbs Center to Center: 6 " Hole: 5/8" diameter Significant volume discounts are available for...
Small Tear Drop Zinc Anode Length: 5 1/4” Width: 2” Thickness: 7/8” C/C: 1 5/8” Hole Diameter: 1/4”
Thickness: 13/16" Diameter: 6 1/2" Weight: 4.85 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Length: 7 1/2" Width: 3" Thickness: 1 1/4" Weight: 6.30 lbs C/C: 3" HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans All Zimar...
Diameter: 98mm
Thickness: 32mm
Weight: 2.20 lbs
Thickness: 1" Diameter: 6 5/8" Weight: 7.80 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Length: 12" Weight: 7.80 lbs Center to Center: 6" Used for Azimut and Atlantis yachts All Zimar plate zinc anodes are cut with specified...
Length: 19"Width: 3 1/4"Thickness: 1 3/4"C/C: 6 1/4"Weight: 25lbs for Benetti Yachts. Whether your boat is sailing in either fresh or sea...
Length: 8 1/4" Width: 2 3/4" Thickness: 1" Weight: 5.00 lbs Center to Center: 3 1/8" or 80mm USED FOR: MONTE CARLO All Zimar...
