No products in the cart.
Propeller Zincs
The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s zinc propeller anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Sale
Diameter: 1 29/32" Height: 1 21/32" Weight: 0.65 lbs Bow and stern Vetus thruster Used in Azimut and Ferretti Yachts side power thrusters Our...
Sale
Diameter: 3 1/4" Height: 3 7/8" Weight: 4.25 lbs Used in Azimut Yachts, Atlantis, Cranchi. Our nut zinc anodes are precision machined to fit...
Sale
Height: 29/32" Diameter: 1 3/4" Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined...
Sale
Diameter: 1 15/16" Height: 2 3/4" Weight: 1.80 lbs Used for Volvo Penta IPS drive foot Whether your boat is sailing in either fresh...
Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8”
Used for CMC Thrusters .
Sale
Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...
Sale
Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...
Sale
Height: 1 21/32" Diameter: 2 25/64" Weight: 1.10 lbs Vetus thruster Zinc anode Zinc anode for bow thruster models 125, 130 and 160. Mounting...
Sale
Length: 3 3/4" Height: 3 3/4" Dimension: 95mm x95mm Width: 5.60 lbs Used For: AZIMUT (70, 72) All plate zinc anodes are cut as...
Sale
Height: 1" Diameter: 4 7/8" Weight: 4.80 lbs Used for: Azimut 68-S propeller cap Whether your boat is sailing in either fresh or sea...
Sale
Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...
Sale
Fits VF108 and VF120 / 3-blade and 4-blade propellers. Anode threads onto the anode holder at the aft end of the propeller. Weight: 0.8...
Sale
Length: 4 3/8" Width: 1 3/4" Thickness: 15/16" Weight: 1.35 lbs Center to Center: 5 1/2" Used in Submarine applications and water pumps in...
Sale
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
Diameter: 1 1/4" Height: 3/4" Weight: 0.22 lbs USED FOR: SEA REX All Zimar plate zinc anodes are cut as per dimensions . These...
Sale
Height: 3 1/2" Diameter: 2 5/16" Weight: 2.50 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
Height: 3 1/2" Diameter: 7 7/8" Weight: 22 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water...
Sale
Center to Center: 1 3/4" Height: 1 3/8" Diameter: 2 5/8" Weight: 1.60 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc...
Sale
Inside Diameter: 5" Outside Diameter: 6.5" Height: 5.5" Weight: 18.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Inside Diameter: 5" Outside Diameter: 6" Height: 6" Weight: 14.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Inside Diameter: 6 1/2" Outside Diameter: 7 1/2" Height: 7 1/2" Weight: 30 FOR: WESTPORT 130L , 40 Meters Our propeller zinc anodes are cut as per...
Sale
Diameter: 5 3/4" Thickness: 2" Weight: 11.00 lbs USED FOR: BENETTI 93' Out plate zinc anodes are cut as per dimensions . These Zimar...
Sale
Height: 2 9/16" Dimension: 1 7/8" Weight: 1.20 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Diameter: 165mm
Height: 91.5mm
Weight: 15 lbs
Sale
Height: 1 3/8" Dimension: 2 5/8" Weight: 3.00 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER Our cone zinc anodes are cut as per...
Sale
Height: 3 9/16" Diameter: 6 1/8" Weight: 25.00 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs Hole C/C: 3" USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are...
Sale
Height: 3 1/2" Diameter: 2 7/8" Weight: 4.80 lbs USED FOR: FERRETTI/RIVA 50,52,56 All Zimar plate zinc anodes are cut as per dimensions ....
Sale
Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs
Used for propeller nut on San Lorenzo 95ft
Sale
Inside Diameter: 6" Outside Diameter: 7.06" Height: 6 3/8" Weight: 22 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Length: 12" Width: 6 1/2" Thickness: 1" Weight: 18.20 lbs C/C: 7" Used in Ferretti Yachts. All Zimar plate zinc anodes are cut with...
About Us
