No products in the cart.
The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Sale
10 ft. Cable Dimensions: 165mmx59mmx26mm Nominal Weight: 2.450 lbs/ 1.3 kilos ZNGUY 1 Small Boat lift zinc anode with 316 STAINLESS STEEL CABLE ....
Sale
Length: 17 5/8” Width: 3 3/4” Thickness 1 5/8” C/C: 9” hole 5/8" x1" Weight: 17lbs Transom, hull Zinc Anode used on Sunseekeer and...
Sale
Diameter: 1/2” Length: 2” Thread: 3/8-16
Sale
Zinc with Brass Cap Diameter: 5/8" Length: 2"NPT: 1/2 Wrench:7/8"
Sale
Length: 7 3/4" Width: 4 1/4" Thickness: 1 1/8" Weight: 8.00 lbs Center to Center: 5" slotted (4 1/2 to 6") Whether your boat is...
Sale
Zinc with Brass Cap Diameter: 1/2” Length:2" NPT:3/8 Wrench: 11/16"
Sale
Zinc with Brass Cap Diameter: 3/8” Length:1 3/4" NPT:1/4 Wrench: 9/16"
Sale
Small Tear Drop Zinc Anode w/custom slotLength: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Sale
Outboard Kit / Aluminum Anode Kit 76214-4A Mercruiser Flat Trim Tab Aluminum Anode (no threads) 76214-5A Mercury/Mercruiser Flat Trim Tab Aluminum Anode 821630A Mercruiser...
Sale
Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...
Sale
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts,Feadship, Oyster Sailboats, Fairline(same as...
Sale
Length: 8 1/4"Width: 3 15/16"Thickness: 1 1/4"Weight: 8.33 lbsC/C: 4" All of our plate zinc anodes are cut with specified bolt patterns as per...
Sale
Swim Platform Zinc Anode (OPACMARE)
LENGTH: 5.12” WIDTH:1.97” HEIGHT: 0.67”
Weight: 2.4 LBS
CENTER TO CENTER HOLES: 3.03”
HOLES: 0.28”
Sale
Anodes mount to existing holes in trim tabs. The kit includes: two (2) anodes and four (4) stainless steel mounting screws. These are priced...
Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except...
Sale
Zinc with Brass Cap Diameter: 1/4" Length: 2" NPT: 1/8 Wrench: 7/16"
Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8”
Used for CMC Thrusters .
Sale
Outboard Kit / Complete Aluminum Anode kit for 1988 and newer Mercruiser Bravo One drives. 76214-5A Flat Trim Tab Aluminum Anode 821630A Mercruiser Bravo...
Sale
Wesmar Bow Thruster Height: 2 1/16” Diameter: 1 11/16”
5/8" Wesmar prop nut
Sale
Small Tear Drop Zinc Anode Length: 5 1/4” Width: 2” Thickness: 7/8” C/C: 1 5/8” Hole Diameter: 1/4”
Sale
Volvo Penta Split Ring Zinc Anode Outside Diameter: 4 Inside Diameter: 1-3/4" Outside Diameter: 4"Weight: 3.4 lbs Mounting hardware not included This anode fits the following saildrive models:...
Sale
Wesmar Bow Thruster Height: 2 1/16” Diameter: 2”
3/4" Wesmar zinc only
Sale
Volvo Penta collar for folding propeller/sailing boat
Sale
Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches
Diameter (top of cone): 1 inchHeight: 1.5 inches
Sale
Kit for 250-300 mm diameter tunnel thruster PAIR
Sale
Zinc with Brass Cap Diameter: 3/4" Length: 2"NPT: 3/4 Wrench:1 1/16"
Sale
Replaces A-30, M-30 Navalloy aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt,...
Sale
Length: 7 1/2" Width: 3" Thickness: 1 1/4" Weight: 6.30 lbs C/C: 3" HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans All Zimar...
All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers ensure...
Sale
Kamewa Jet Anodes KSP-750
Kamewa block bar for Jet DriveLength: 2.30” Width: 2.42” Thickness: 0.98” C/C: 0.71”
Sale
Zinc with Brass Cap Diameter: 3/4" Length: 3 3/8" NPT: 3/4 Wrench: 1 1/16"
Sale
Length: 6 1/4” Width: 5 7/8” Thickness: 1/2” 5 Holes/Mercury Zeus pod trim tab anode
Sale
Yamaha 200-300 HP Outboard Fin/Skeg STANDARD Base Diameter: 4” Threaded Mounting Hole: M10 x 1.25mm 61A-45371-00 Yamaha 200-300 HP Outboard Trim Tab Zinc Anode...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. For 2003 and older 83mm hubs. For 1 1/2”” to 1 3/4”(38mm to...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Fits 2001 and older 70mm hubs non-circular in diameter. For 1 1/4” to...
Kamewa Jet Drive Thickness:0.98”
Sale
Performance Metals Navalloy aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish...
Sale
Diameter: 98mm
Thickness: 32mm
Weight: 2.20 lbs
Sale
Kit for Volvo Penta 290 DP drives 745 (VP-733BIS+VP737)
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Fits 2001 and older 63mm hubs non-circular in diameter. For 3/4” to 1...
Sale
Kit for 140 mm diameter tunnel thruster
#1080
Sale
Outboard Kit / Complete Aluminum Anode kit for Mercruiser Bravo II & III Sterndrives. Fits 1988 and newer Bravo II drives and 1995-2003 Bravo...
Sale
Kamewa Jet Drive Length: 6.69” Width: 3.35” Thickness: 0.91” C/C: 3.11”
Sale
Diameter: 140mm Thickness: 1 1/2 inches Weight: 5 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Sale
Rudders and Trim tabs/ Small Plate
Weight: 1.17lb
Length: 3.35"
C/C: 2"
Sale
Wesmar Bow Thruster Length: 3 3/4” Dimension: 3”
Sale
Outboard Kit / Aluminum Anode Kit 880653A Manifold Aluminum Anode 892227A Trim Cylinder Aluminum Anode(Qty 4) 826134A Wedge Aluminum Anode(Qty 2) 76214-5A Flat Trim...
Sale
Diameter: 3 3/4" Thickness : 1" Round Plate boat zinc anode used for Hamilton jet drives for refit and corrosion control 99% pure marine...
Sale
Height: 3” Weight: 9.0Dimension: 4 7/16” C/C: 3 7/16"
Sale
Hamilton Jet HJ362/363/391/401; HM422
Zinc Anode Weight: 20.15lbs
Aluminum Anode Weight: 7lbs
Diameter: 175mm
Height: 57mm
Center-to-Center: 70mm
Availability: In Stock. Ships Today
S/S A2-70 Bolt Socket Head Cap Screw
Side bolts for FE-80 Zinc Anode
(sold as a pair)
Sale
Wesmar Bow Thruster Length: 3 3/8” Dimension: 2 3/4”
Sale
Wesmar Bow Thruster Length: 3 1/2” Dimension: 2 3/4”
Sale
Wesmar Bow Thruster Length: 2 15/16” Dimension: 2 1/4”
Sale
Volvo Penta cavitation plate for outdrive shell shape
Sale
Length: 6” Width: 4” Thickness: 1/2” Slot Width: 1 1/4” to 4 1/4” Slot Height: 3/8”
Sale
Outboard Kit / Aluminum Anode kit for Verado-4, Optimax, and other Mercury outboards. 818298A Mercury Outboard Bar Aluminum Anode(Qty 1) 826134A Wedge Aluminum Anode(Qty...
Sale
Outboard Kit / Complet Aluminum Anode kit for 1984-1990 Mercruiser MR & Alpha One drives 31640A Mercury/Mercruiser Standard Trim Tab Aluminum Anode 821631A Mercruiser...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Zinc anode for 100mm Max Prop propeller hubs. For 2” (45mm to 50mm)...
Showing: 1 -67 of 67
About Us
