No products in the cart.
Propeller Zincs
The Zinc Guy’s zinc anodes set the standard when it comes to cathodic protection.
Our Zinc Anodes meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
The Zinc Guy’s zinc propeller anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Sale
Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs Hole C/C: 3" USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are...
Sale
Height: 2 3/8" Dimension: 1 7/8" Weight: .80 lbs USED FOR: AZIMUT/CRANCHI All cone zinc anodes are cut as per dimensions . These cone...
Sale
Diameter: 7 1/2" Inside Diameter: 6.3" 160MMThickness: 2 3/4"Weight: 30 lbs Used in Benetti Yachts. Whether your boat is sailing in either fresh...
Sale
Diameter: 6 3/8" Thickness: 2" Weight: 14.80 lbs Used in Benetti Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 7" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...
Sale
Height: 1" Diameter: 5 1/2" Weight: 5.80 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Height: Diameter: Weight: 18.5 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Diameter: 150mm
Height: 104mm
Weight: 18.50
Diameter: 200mm
Height: 38mm
Weight: 14.50
Sale
Used to prevent corrosion for your sailing boats.
Height: 4" (10.16cm)
Top Diameter: 2.5" (6.35cm)
Bottom Diameter: 3.25" (8.255cm)
Sale
Height: 3 7/8"Diameter: 5 1/2"Weight: 18.80 lbs These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes...
Sale
Height: 4"Diameter: 6 3/4"Weight: 29.80 lbs These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes are...
Height: 5 1/8" Diameter: 9 7/16" Weight: 45.00 lbs Used in 108 106 San Lorenzo Yachts. Whether your boat is sailing in either fresh...
Sale
USED FOR: BENETTI All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on attachment....
Sale
Height: 5 1/8" Diameter: 9 7/16" Weight: 45.00 lbs
San Lorenzo 108' motor yacht propeller nut custom made
Sale
Height: 1"Diameter: 6 3/4"Weight: 8.20 lbs USED FOR: SAN LORENZO All plate zinc anodes are cut as per dimensions . These plate boat zincs...
Sale
Height: 7/8"Diameter: 5 3/8"Weight: 4.40 lbs USED FOR: SAN LORENZO 72 All plate zinc anodes are cut as per dimensions . These late boat...
Sale
Diameter: 277/8" Thickness: 3" Weight: 35.00 lbs USED FOR: BENETTI All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate...
Sale
Height: 1 1/4" Diameter: 6 1/2" Weight: 10.80 lbs USED FOR: AZIMUT 72 All plate zinc anodes are cut as per dimensions . Our...
Sale
Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs are pre-drilled for...
Sale
Length: 12" Width: 6 1/2"Thickness: 1 1/4"Weight: 18.20 lbs C/C: 6" Used in Ferretti, Mangusta Yachts, Transom All plate zinc anodes are cut with...
Sale
Height: 6 1/2" Diameter: 8"Weight: 61.00 lbs Used in Ferretti Yachts. These nut zinc anodes are precision machined to fit over specific nut configurations...
Sale
Height: 1 3/4" Diameter: 7" Weight: 18 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...
About Us
