Recommended products (Seguno)

Length:8"Width:1-3/8" Thickness:3/4" Mounting Holes:4" center-to-center Weight:1.0 lbs SKU:6H1-45251-02

SWIVEL Forerunner SYSTEM  from 5/8" chain size starting price here SWIVEL FORERUNNER 5/8 G2 HDG 1.0 LLOYDS (copy)  System Components stud and common links...

Length: 114mm Width: 63mm Thickness: 28mm Weight: 2.5 lbs C/C:  1 1/2" slotted

Diameter: 150mm Height: 47mm Weight: 11.50 Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. Our zinc...

R6500A Rudder / Trim Tab Anode - 6 1/2" - Aluminum shaft anode with 2 halves and stainless steel hardware. Replaces R7. Nuts are pressed into the...

Mercruiser Kit 10059A

Rudders and Trim tabs/ Small Plate Weight: 1.17lb Length: 3.35" C/C: 2"  

Hamilton Jet Engine Washer Anode Diameter: 1.85"                                                                                                           Height: 0.98"                                                    ...

Zinc anode that prevents corrosion of your engine. Length: 5.04"   Width: 1.73"   Thickness: 0.83" Weight: 1.124 lbs (2 for each engine)

Diameter: 230mm/9.05" Height: 64mm/2.5" Weight: 47.50lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on attachment....

Diameter: 140mm Thickness: 1 1/2 inches Weight: 5 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Diameter: 4 inches Thickness: 7/8 inches Weight: 1.5 lbs All OUR plate zinc anodes are cut as per dimensions . These  plate boat zincs...

Length: 114mm Width: 63mm Thickness: 28mm Weight: 2.5 lbs C/C:  40mm

Inside Diameter: 2.4"  Outside Diameter: 3.75" Height: 1.75" Weight 2.9lbs (1.4kg)

4.5 HP outboards - Mercury Engine Anodes - Length: .79” Width: .79” Thickness: .28” - Weight: .022 lbs

Alpha One and Bravo One Nut for outdrives - Mercury Engine Anodes -  Length: 1.22” Width: 1.22” Thickness: 1.18” - Weight: .220 lbs

Alpha One and Alpha One Gen 2 outdrives - Mercury Engine Anodes - Length: 4.06” Width: 3.07” Thickness: 1.5” - Weight: 2.193 lbs

Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs Hole C/C: 3" USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are...

Height: 3 1/2" Diameter: 2 7/8"Weight: 4.80 lbs USED FOR: FERRETTI/RIVA 50,52,56 All CONE  zinc anodes are cut as per dimensions . These  boat...

Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs Used for propeller nut on San Lorenzo 95ft

Length: 8 1/4"Width: 2 3/4"Thickness: 1"Weight: 5.00 lbsCenter to Center: 3 1/8" or 80mm USED FOR: MONTE CARLO All THIS SPECIAL zinc anodes are...

Diameter: 1 1/2" Length : 24"  Weight: 11.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...

Length: 19"Hole Dist: 13"Weight: 12.8 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs are...

Length: 18"Weight: 12.30 lbsCenter to Center: 12" All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs...

Length: 14"Width: 6 1/2"Thickness: 1 1/4"Weight: 23.00 lbsOW: 10" These Zimar plate zinc anodes are cut as per dimensions with galvanized steel mounting strips...

Length: 14 1/4" Width: 5 7/8"Thickness: 2"Weight: 33.00 lbsOL: 18 3/4" These Weld on  plate zinc anodes are cut as per dimensions with galvanized...

Length: 13 1/2" Width: 4 3/4"Thickness: 1 5/8"Weight: 23.00 lbsOL: 17 3/4" These Weld on plate zinc anodes are cut as per dimensions with galvanized...

Length: 6 1/2" Width: 3"Thickness: 1 1/8"Weight: 5.00 lbsOL: 10 These Weld on late zinc anodes are cut as per dimensions with galvanized steel mounting...

Diameter: 1 15/16"Height: 1 7/16"Weight: 1.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards...

Diameter: 1 7/8" Height: 2 7/16" Weight: .80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...

Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 7" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...

Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 5" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...