Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar collar zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Zinc with Brass Cap Diameter: 3/8” Length:1 3/4" NPT:1/4 Wrench: 9/16"
Zinc with Brass Cap Diameter: 1/2” Length:2" NPT:3/8 Wrench: 11/16"
Length: 12 1/8" Width: 3" Thickness: 1 1/4" Weight: 11.57 lbs Center to Center: 14 3/8" OL: 16" with Slotted Strap. These plate zinc...
Diameter: 5 1/16" Weight: 5.10 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Diameter: 2 15/16" Weight: 0.48 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Length: 12" Width: 2" Thickness: 1/2" Weight: 2.95 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...
Height: 29/32" Diameter: 1 3/4" Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined...
Length: 12" Width: 6" Thickness: 1" 1/4" Weight: 22.50 lbs OW: 10" ZHS 23 VOLUME DISCOUNTS Significant volume discounts are available for this anode....
Length: 3 3/4" Width: 2 3/4" Thickness: 9/16" Weight: 0.55 lbs Center to Center: 1 5/16 Boat Lift Zinc bolt on Anode: This hull...
Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...
Small Tear Drop Zinc Anode w/custom slotLength: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Outboard Kit / Aluminum Anode Kit 76214-4A Mercruiser Flat Trim Tab Aluminum Anode (no threads) 76214-5A Mercury/Mercruiser Flat Trim Tab Aluminum Anode 821630A Mercruiser...
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts, Oyster Sailboats, Fairline(same as...
Diameter: 3 1/2" Weight: 9.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Swim Platform Zinc Anode (OPACMARE)
LENGTH: 5.12” WIDTH:1.97” HEIGHT: 0.67”
Weight: 2.4 LBS
CENTER TO CENTER HOLES: 3.03”
HOLES: 0.28”
Anodes mount to existing holes in trim tabs. The kit includes: two (2) anodes and four (4) stainless steel mounting screws. These are priced...
Diameter: 1 7/8" Weight: 0.25 lbs Used in Azimut Yachts Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Diameter: 1 15/16" Height: 2 3/4" Weight: 1.80 lbs Used for Volvo Penta IPS drive foot Whether your boat is sailing in either fresh...
Length: 8 1/4"Width: 3 15/16"Thickness: 1 1/4"Weight: 8.33 lbsC/C: 4" All of our plate zinc anodes are cut with specified bolt patterns as per...
Length: 7 3/4" Width: 2 1/2" Thickness: 1 1/4" Weight: 5.20 lbs Center to Center: 9" OL: 11" Used in Feretti Yachts. All Zimar plate...
Diameter: 2 1/4" Weight: 5.15 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Diameter: 1" Height: 1 1/4" Weight: 0.22 lbs H.E. PLUG1/ #178369AM Heat exchanger zinc anode Marine transmission solution TWIN DISC/COOLING SYSTEM P/N 163760 Used...
Length: 7 3/4" Width: 3" Thickness: 1 3/8" Weight: 7.20 lbs Center to Center: 10" OL: 11 3/4" Used in Feretti Yachts. All Zimar...
Diameter: 4" Weight: 12.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Length: 12" Width: 1 1/2" Thickness: 1/2" Weight: 2.35 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs...
Diameter: 6 1/2" Weight: 9.70 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except...
Thickness: 1 1/2" Diameter: 6" Weight: 5.50 lbs USED FOR: MANGUSTA/MAJORA/LEOPARD/UNIESSE/VICEM/AZIMUT/FERRETTI/RIVA/ CRANCHI/SUNSEEKER/ATLANTIC/SAN LORENZO/MONTE CARLO All Zimar plate zinc anodes are cut as per dimensions...
Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our nut zinc anodes are precision machined...
Length: 12" Width: 6" Thickness: 1 1/4" Weight: 23.00 lbs Center to Center: 6 " Hole: 5/8" diameter Significant volume discounts are available for...