No products in the cart.
Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar collar zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
$25.00
Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except JB,...
Sale
DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Sale
Thickness: 1"Diameter: 8 3/4"Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi , Feadship Whether your boat is sailing...
Sale
Thickness: 1" Diameter: 3 15/32" Weight: 1.70 lbs Very special rudder Zinc for Sunseeeker and European yachts. Recently the best seller for Salt Water...
Sale
Diameter: 3" Weight: 7.90 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Length: 9 1/4" Width: 3 3/8" Thickness: 7/8" Weight: 3.60 lbs The A-26 is used on Ocean Yachts, Egg Harbor and many other fine...
Sale
Diameter: 2 3/4" Weight: 9.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Zinc with Brass Cap Diameter: 1/4" Length: 2" NPT: 1/8 Wrench: 7/16"
Sale
Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...
Sale
Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...
Sale
Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...
Sale
Outboard Kit / Complete Aluminum Anode kit for 1988 and newer Mercruiser Bravo One drives. 76214-5A Flat Trim Tab Aluminum Anode 821630A Mercruiser Bravo...
Sale
Thickness: 1 1/4"Diameter: 5 1/2"Weight: 6.20 lbs Hole diameter : 0.574" All zinc anodes are cut as per dimensions . These boat zincs are undrilled...
Sale
Length: 7 7/8"Width: 3 7/8"Thickness: 1 3/16"Weight: 8.10 lbsCenter to Center: 4 3/8" All plate zinc anodes are cut with specified bolt patterns as...
Sale
Height: 2"Diameter: 2 7/8"Weight: 3.00 lbs These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes are...
Sale
Length: 7" Width: 1 15/16" Thickness: 1 1/2" Weight: 4.20 lbs Center to Center: 5"/130mm Arnesson drive bar for Pershing yachts Whether your boat...
Sale
Inside Diameter: 1 1/4" Outside Diameter: 2 1/2 Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Small Tear Drop Zinc Anode Length: 5 1/4” Width: 2” Thickness: 7/8” C/C: 1 5/8” Hole Diameter: 1/4”
Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8”
Used for CMC Thrusters .
Sale
Length: 8 1/2" Width: 3" Thickness: 1 1/2" Weight: 5.00 lbs OL: 12 1/2 These TZG plate zinc anodes are cut as per dimensions...
Sale
Height: 1 21/32" Diameter: 2 25/64" Weight: 1.10 lbs Vetus thruster Zinc anode Zinc anode for bow thruster models 125, 130 and 160. Mounting...
Sale
Length: 6 1/4" Width: 2 3/4" Thickness: 9/16" Weight: 2.33 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions...
Sale
Length: 6" 7/8Width: 3" 3/8Thickness: 7/8"Hole Dist: 4"Weight: 4 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions . These...
Sale
Wesmar Bow Thruster Height: 2 1/16” Diameter: 1 11/16”
5/8" Wesmar prop nut
Sale
Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...
Sale
Length: 3 3/4" Height: 3 3/4" Dimension: 95mm x95mm Width: 5.60 lbs Used For: AZIMUT (70, 72) All plate zinc anodes are cut as...
Sale
Length: 9 1/4"Width: 2 1/2"Thickness: 1"Weight: 4.80 lbsCenter to Center: 5 1/2" or 140mm Used in Azimut Yachts. Whether your boat is sailing in...
Sale
Diameter: 3/4" Weight: 2.70 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Height: 1" Diameter: 4 7/8" Weight: 4.80 lbs Used for: Azimut 68-S propeller cap Whether your boat is sailing in either fresh or sea...
Sale
Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Sale
DIAMETER: 95mm Weight: 13.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
About Us
