all

Length: 7 3/4" Width: 3"Thickness: 1 3/8"Weight: 7.20 lbsCenter to Center: 10" OL: 11 3/4" Used in Feretti Yachts. All our zinc anodes are...

Diameter: 6 1/2"Weight: 9.70 lbs Used in Azimut Yachts, stabilizers and rudder in megayachts. Whether your boat is sailing in either fresh or sea...

Length: 12" Width: 1 1/2" Thickness: 1/2" Weight: 2.35 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs...

Thickness: 1 1/2"Diameter: 6"Weight: 5.50 lbs USED FOR: MANGUSTA/MAJORA/LEOPARD/UNIESSE/VICEM/AZIMUT/FERRETTI/RIVA/ CRANCHI/SUNSEEKER/ATLANTIC/SAN LORENZO/MONTE CARLO All our plate zinc anodes are cut as per dimensions . These...

Thickness: 3/4"Diameter: 2 25/32"Weight: 0.85 lbs Used in Azimut Yachts and TWIN DISC DRIVES. Very special rudder Zinc for Sunseeeker and European yachts. Recently...

Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our  nut zinc anodes are precision machined...

Thickness: 1" Diameter: 3 15/32" Weight: 1.70 lbs Very special rudder Zinc for Sunseeeker and European yachts. Recently the best seller for Salt Water...

DIAMETER: 40mm Weight: 3.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Length: 12" Width: 6" Thickness: 1 1/4" Weight: 23.00 lbs Center to Center: 6 "  Hole: 5/8" diameter  Significant volume discounts are available for...

DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...

Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except JB,...

Diameter: 3" Weight: 7.90 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Diameter: 2 3/4" Weight: 9.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Thickness: 1"Diameter: 8 3/4"Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi , Feadship Whether your boat is sailing...

Length: 9 1/4" Width: 3 3/8" Thickness: 7/8" Weight: 3.60 lbs The A-26 is used on Ocean Yachts, Egg Harbor and many other fine...

Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...

Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...

Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...

Zinc with Brass Cap Diameter: 1/4" Length: 2" NPT: 1/8 Wrench: 7/16"

Thickness: 1 1/4"Diameter: 5 1/2"Weight: 6.20 lbs Hole diameter : 0.574" All zinc anodes are cut as per dimensions . These boat zincs are undrilled...

Length: 7 7/8"Width: 3 7/8"Thickness: 1 3/16"Weight: 8.10 lbsCenter to Center: 4 3/8" All plate zinc anodes are cut with specified bolt patterns as...

Height: 2"Diameter: 2 7/8"Weight: 3.00 lbs These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes are...

Length: 7" Width: 1 15/16" Thickness: 1 1/2" Weight: 4.20 lbs Center to Center: 5"/130mm Arnesson drive bar for Pershing yachts Whether your boat...

Inside Diameter: 1 1/4" Outside Diameter: 2 1/2 Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...

E.B. - F.B. 55 HP - BRP (Omc / Johnson / Evinrude) Engine Anodes - Skeg zinc anode Length: 5.12” Width: 4.33” Thickness: 2.87”...

Outboard Kit / Complete Aluminum Anode kit for 1988 and newer Mercruiser Bravo One drives. 76214-5A Flat Trim Tab Aluminum Anode 821630A Mercruiser Bravo...

Diameter:1/4” Length: 2” Thread: 1/4 - 20

Length: 3 3/4" Height: 3 3/4" Dimension: 95mm x95mm Width: 5.60 lbs Used For: AZIMUT (70, 72) All plate zinc anodes are cut as...

Length: 8 1/2" Width: 3" Thickness: 1 1/2" Weight: 5.00 lbs OL: 12 1/2 These TZG plate zinc anodes are cut as per dimensions...

All rudder/trim tab aluminum anodes have stainless steel nuts that are pressed in.  Wear indicator installed Diameter: 5"(127mm)  Thickness of (1) Half: 5/8" (16mm)...

Yanmar SD20. SD25. SD30. SD40. SD50. and SD60 Saildrives

Height: 1 21/32" Diameter: 2 25/64" Weight: 1.10 lbs Vetus thruster Zinc anode Zinc anode for bow thruster models 125, 130 and 160. Mounting...