all

Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...

All rudder/trim tab aluminum anodes have stainless steel nuts that are pressed in.  Wear indicator installed Diameter: 5"(127mm)  Thickness of (1) Half: 5/8" (16mm)...

Yanmar SD20. SD25. SD30. SD40. SD50. and SD60 Saildrives

Small Tear Drop Zinc Anode Length: 5 1/4” Width: 2” Thickness: 7/8” C/C: 1 5/8” Hole Diameter: 1/4”

Outboard Kit / Complete Aluminum Anode kit for 1988 and newer Mercruiser Bravo One drives. 76214-5A Flat Trim Tab Aluminum Anode 821630A Mercruiser Bravo...

S/S A2-70 Bolt Socket Head Cap Screw Application: VT-1, SP-2, Vetus, Thrusters, Side power

Diameter: 4 1/2" Weight: 17.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Length: 3 3/4"Height: 3 3/4"Dimension: 95mm x95mmWidth: 5.60 lbs Used For: AZIMUT (70, 72) Whether your boat is sailing in either fresh or sea...

Length: 9 1/4"Width: 2 1/2"Thickness: 1"Weight: 4.80 lbsCenter to Center: 5 1/2" or 140mm Used in Azimut Yachts. Whether your boat is sailing in...

Diameter:1/4” Length: 2” Thread: 1/4 - 20

Length: 6 1/4" Width: 2 3/4" Thickness: 9/16" Weight: 2.33 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions...

Wesmar Bow Thruster Height: 2 1/16” Diameter: 2” 3/4" Wesmar zinc only 

Washer Vetus Conical Plate Fuel Anode Diameter: 78mm Height: 45mm Weight: 2.31 lbs Vetus/ Thruster Anodes/ Conical Plate  

Mercury / Mariner 35-300hp 2 each engine - Mercury Engine Anodes - Length: 3.03” Width: 1.18” Thickness: .87” (.47” smaller side’s height) - Weight:...

Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8” Used for CMC Thrusters .

Length: 13 1/4" Width: 5 3/8"Thickness: 1 1/8"Weight: 21.00 lbsOL: 18 3/4" C/C: 17 1/4"   Used for transom application in Riviera Yachts and...

Length: 16"Weight: 10.80 lbsCenter to Center: 10" All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs...

Length Overall:  16" Length of Anode:  12" Width:  3" Thickness:  1-1/4" Steel Tabs:  2" x 1-1/4" (nominal) Weight:  5 lbs Aluminum strap 1-1/4" wide runs end-to-end through the anode and...

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener.  Stainless steel nuts are pressed in, and plastic retaining washers...

DIAMETER: 80mm Weight: 7.20 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...

Replaces A-30, M-30 Navalloy aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt,...

Weight: 1.06 lbs Fits all Flexofold 2-blade closed propellers. 3-blade propellers. 4-blade up to 23".

VOLVO PENTA IPS ACP Transom plate , We take pride in keeping corrosion away from the vital parts of your boats. We aim to...

Diameter: 1" Weight: 1.20 lbs Inside Diameter: 1” Outside Diameter: 2 1/2” Thickness:1 1/4” Whether your boat is sailing in either fresh or sea...

Diameter: 5 inches Thickness: 1 1/8 inches Weight: 3.50 All our plate zinc anodes are cut as per dimensions . These plate boat zincs...

Diameter: 3/4" Weight: 2.70 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Height: 1" Diameter: 4 7/8" Weight: 4.80 lbs Used for: Azimut 68-S propeller cap Whether your boat is sailing in either fresh or sea...

DIAMETER: 95mm Weight: 13.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

DIAMETER: 30mmWeight: 1.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All...

Length: 7 1/2"Width: 3"Thickness: 1 1/4"Weight: 6.30 lbs C/C: 3"  HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans  All plate zinc anodes are...

Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...

Diameter: 3 inches Thickness: .75 inches Weight: 1/2 lb All our plate zinc anodes are cut as per dimensions . These r plate boat...