all

Inside Diameter: 5" Outside Diameter: 6.5" Height: 5.5" Weight: 18.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...

Length: 6" OL: 10"Width: 6"Thickness: 1 1/4"Weight: 11.20 lbs These WELD ON plate zinc anodes are cut as per dimensions with galvanized steel mounting strips...

Length: 12"Weight: 7.80 lbsCenter to Center: 6" Used for Azimut and Atlantis  yachts All plate zinc anodes are cut with specified bolt patterns as per...

Length: 16" Width: 3" Thickness: 1/2" Weight: 6.00 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Yamaha 200-300 HP Outboard Fin/Skeg STANDARD  Base Diameter: 4” Threaded Mounting Hole: M10 x 1.25mm 61A-45371-00 Yamaha 200-300 HP Outboard Trim Tab Zinc Anode...

Thickness:  1" Diameter: 5 3/4" Weight: 5.5 lbs All zinc anodes are cut as per dimensions . These boat zincs are undrilled for bolt-on...

Length Overall:  16"Length of Anode:  12"Width:  3"Thickness:  1-1/4"Steel Tabs:  2" x 1-1/4" (nominal)Weight:  5.5 lbs Mild steel strap 1-1/4" wide runs end-to-end through the anode and extends 2" out each...

Diameter: 100mm Thickness: 22mm Weight: 2.5 lbs Single round for San Lorenzo yachts swim platforms and other applications.

Length: 8 1/4"Width: 2 3/4"Thickness: 1"Weight: 5.00 lbsCenter to Center: 3 1/8" or 80mm USED FOR: MONTE CARLO All THIS SPECIAL zinc anodes are...

Weight:48 lbsDimensions:4 1/2"x24"x2 1/4"Current amp. -yr. rating 2 Some in stock , big volume:ON SPECIAL REQUEST ONLY Whether your boat is sailing in either...

Length: 14"Width: 6 1/2"Thickness: 1 1/8"Weight: 19.80 lbsCenter to Center: 5" SEA RAY Transom Zinc Anode. Whether your boat is sailing in either fresh...

Diameter: 3" Weight: 6.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Special Propeller Zinc Anode FOR SAN LORENZO YACHTS. Diameter: 152mm Height: 92mm Weight: 15 lbs

Bravo 3 cone - Mercury Engine Anodes - Length: 2.13” Width: 2.13” Thickness: 2.24” - Weight: 1.133 lbs

Length: 6” Width: 4” Thickness: 1/2” Slot Width: 1 1/4” to 4 1/4” Slot Height: 3/8”

Kit for 140 mm diameter tunnel thruster #1080/589150

Length: 17 5/8” Width: 3 3/4” Thickness 1 5/8” C/C: 9” hole 5/8" x1" Weight: 4.5Lbs Transom, hull Aluminum Anode used on Sunseekeer and...

DIAMETER: 100mm Weight: 12.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Inside Diameter: 6 1/2" Outside Diameter: 7 1/2" Height: 7 1/2" Weight: 30 FOR: WESTPORT 130L , 40 Meters Our propeller zinc anodes are cut as per...

Length: 48" Width: 2" Thickness: 1/2" Weight: 11.9 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat...

Length: 12" Width: 3" Thickness: 1/2" Weight: 4.70 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Length: 12" 1/8Width: 3"Thickness: 1" 1/4Weight: 11.23 lbs All  plate zinc anodes are cut as per dimensions . Theseplate boat zincs are undrilled for...

Length: 14 1/4" Width: 5 7/8"Thickness: 2"Weight: 33.00 lbsOL: 18 3/4" These Weld on  plate zinc anodes are cut as per dimensions with galvanized...

Length: 11 5/8" Width: 4 1/8" Thickness: 1 9/16" Weight: 16.50 lbs OL: 15 3/4"

Inside Diameter: 6" Outside Diameter: 7.06" Height: 6 3/8" Weight: 22 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...

Hole Diameter: 10mm Length:  30mm 7/16"UNC  Volvo Penta Diesel Engine Zinc Anode original part #838929 

Performance Metals Navalloy aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish...

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers...

25lb Lead Bags/ Heavy Duty Nylon Bags, Very Durable with high Ultraviolet Resistance Best for balance ballast applications Call us for large quanitities/ Miami-Dade...

  Length: 19"Width: 3 1/4"Thickness: 1 3/4"C/C: 6 1/4"Weight: 25lbs for Benetti Yachts.   Whether your boat is sailing in either fresh or sea...

Height: 2 9/16" Dimension: 1 7/8" Weight: 1.20 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...

Diameter: 1 1/2" Height: 2" Weight: 1 lb Used for Stabilizers  ABT, American Bow Thruster Co.