all

Alpha One and Alpha One Generation 2 outdrives - Mercury Engine Anodes  Length: 4.06” Width: 3.07” Thickness: 1.5” Weight: 1.962 lbs 

Outboard Kit / Complete Aluminum Anode kit for Mercruiser Bravo II & III Sterndrives. Fits 1988 and newer Bravo II drives and 1995-2003 Bravo...

Flaps zinc anode 4.6"X1.3"X.75" H

Length:8"Width:1-3/8" Thickness:3/4" Mounting Holes:4" center-to-center Weight:1.0 lbs SKU:6H1-45251-02

Rudders and Trim tabs/ Small Plate Weight: 1.17lb Length: 3.35" C/C: 2"  

Diameter: 230mm/9.05" Height: 64mm/2.5" Weight: 47.50lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on attachment....

Diameter: 140mm Thickness: 1 1/2 inches Weight: 5 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs Used for propeller nut on San Lorenzo 95ft

Diameter: 1 1/2" Length : 24"  Weight: 11.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...

Diameter: 1 15/16"Height: 1 7/16"Weight: 1.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards...

Diameter: 1 7/8" Height: 2 7/16" Weight: .80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...

Height: 1" Diameter: 5 1/2" Weight: 5.80 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is...

DIAMETER: 100mm Weight: 12.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Inside Diameter: 6" Weight: 32.40 lbs Length: 4.800" Outside diameter : 8.700" Whether your boat is sailing in either fresh or sea water is...

Mercruiser Kit 10059A

Zinc anode that prevents corrosion of your engine. Length: 5.04"   Width: 1.73"   Thickness: 0.83" Weight: 1.124 lbs (2 for each engine)

Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs Hole C/C: 3" USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are...

Height: 3 1/2" Diameter: 2 7/8"Weight: 4.80 lbs USED FOR: FERRETTI/RIVA 50,52,56 All CONE  zinc anodes are cut as per dimensions . These  boat...

Length: 19"Hole Dist: 13"Weight: 12.8 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs are...

Length: 18"Weight: 12.30 lbsCenter to Center: 12" All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs...

Length: 14"Width: 6 1/2"Thickness: 1 1/4"Weight: 23.00 lbsOW: 10" These Zimar plate zinc anodes are cut as per dimensions with galvanized steel mounting strips...

Length: 14 1/4" Width: 5 7/8"Thickness: 2"Weight: 33.00 lbsOL: 18 3/4" These Weld on  plate zinc anodes are cut as per dimensions with galvanized...

Length: 13 1/2" Width: 4 3/4"Thickness: 1 5/8"Weight: 23.00 lbsOL: 17 3/4" These Weld on plate zinc anodes are cut as per dimensions with galvanized...

Length: 6 1/2" Width: 3"Thickness: 1 1/8"Weight: 5.00 lbsOL: 10 These Weld on late zinc anodes are cut as per dimensions with galvanized steel mounting...

Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 7" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...

Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 5" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...

Length: 114mm Width: 63mm Thickness: 28mm Weight: 2.5 lbs C/C:  1 1/2" slotted

R6500A Rudder / Trim Tab Anode - 6 1/2" - Aluminum shaft anode with 2 halves and stainless steel hardware. Replaces R7. Nuts are pressed into the...

All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers...

Hamilton Jet Engine Washer Anode Diameter: 1.85"                                                                                                           Height: 0.98"                                                    ...

Diameter: 150mm Height: 47mm Weight: 11.50 Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. Our zinc...

SWIVEL Forerunner SYSTEM  from 5/8" chain size starting price here SWIVEL FORERUNNER 5/8 G2 HDG 1.0 LLOYDS (copy)  System Components stud and common links...