Recommended products (Seguno)



This collection was generated by the Seguno app for use in email marketing and is not available on any sales channels. By default, it is configured to show your best-selling products that are in stock and not free.
Length: 7 3/4" Width: 4 1/4" Thickness: 1 1/8" Weight: 8.00 lbs Center to Center: 5" slotted (4 1/2 to 6") Whether your boat is...
Benefits of using Propspeed Kit 1000ML FUEL SAVINGS INCREASED SPEED REDUCED MAINTENANCE ENVIRONMENTALLY FRIENDLY BONDS TO ANY METAL 1000ML Propspeed Kit. Foul release coating...
Height: 29/32"Diameter: 1 3/4"Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined to fit...
Diameter: 1 3/8" Weight: 1.30 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Diameter: 5 1/16"Weight: 5.10 lbs Used in Azimut Yachts , stabilizers and mega yachts trim tabsangd rudders. Whether your boat is sailing in either...
Zinc with Brass Cap Diameter: 1/2” Length:2" NPT:3/8 Wrench: 11/16"
Zinc with Brass Cap Diameter: 3/8” Length:1 3/4" NPT:1/4 Wrench: 9/16"
$7.49$5.99
Diameter: 2 15/16"Weight: 0.48 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. ...
$59.99$29.87
Trim Tab (00180A) - Transom Anode (00127A) Hardware: M10-1.25 x 45mm S/S SHCS M6 x 1mm x 25mm S/S Bolt x4 6mm Flat Washer...
Length: 12" Width: 6" Thickness: 1" 1/4" Weight: 22.50 lbs OW: 10" ZHS 23 VOLUME DISCOUNTS Significant volume discounts are available for this anode....
Diameter: 3 1/2" Weight: 9.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Length: 3 3/4"Width: 2 3/4"Thickness: 9/16"Weight: 0.55 lbsCenter to Center: 1 5/16 Boat Lift Zinc bolt on Anode:This hull zinc anode Z-20 is used...
Divers Plate Aluminum
Length: 12"
Width: 6"
Weight: 5.7lbs
Length: 12" Width: 2" Thickness: 1/2" Weight: 2.95 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...
Diameter: 1" Height: 1 1/4" Weight: 0.22 lbs H.E. PLUG1/ #178369AM Heat exchanger zinc anode Marine transmission solution TWIN DISC/COOLING SYSTEM P/N 163760 Used...
Small Tear Drop Zinc Anode w/custom slotLength: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts,Feadship, Oyster Sailboats, Fairline(same as...
Length: 8 1/4"Width: 3 15/16"Thickness: 1 1/4"Weight: 8.33 lbsC/C: 4" All of our plate zinc anodes are cut with specified bolt patterns as per...
Outboard Kit / Aluminum Anode Kit 76214-4A Mercruiser Flat Trim Tab Aluminum Anode (no threads) 76214-5A Mercury/Mercruiser Flat Trim Tab Aluminum Anode 821630A Mercruiser...
Diameter: 4" Weight: 12.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
All rudder/trim tab aluminum anodes have stainless steel nuts that are pressed in. Wear indicator installed. Used with aluminum outdrives Diameter: 3 3/4" (95mm)...
Diameter: 1 15/16" Height: 2 3/4" Weight: 1.80 lbs Used for Volvo Penta IPS drive foot Whether your boat is sailing in either fresh...
Diameter: 2 1/4" Weight: 5.15 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Diameter: 1 7/8"Weight: 0.25 lbs Used in Azimut Yachts Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Special Transom Zinc Anode
Weight: 2.5 lbs
Length: 228mm -Width: 32mm -Thickness: 25mm
Center to center hole 150mm
Swim Platform Zinc Anode (OPACMARE)
LENGTH: 5.12” WIDTH:1.97” HEIGHT: 0.67”
Weight: 2.4 LBS
CENTER TO CENTER HOLES: 3.03”
HOLES: 0.28”
Diameter: 100mm Thickness: 45mm Weight: 5.50 lbs Used for San Lorenzo yachts, swim platform in the stern area come in pair or single ( half price) with...
Length: 7 3/4" Width: 2 1/2"Thickness: 1 1/4"Weight: 5.20 lbsCenter to Center: 9" OL: 11" Used in Ferretti Yachts. All our zinc anodes are cut...
Length: 10 1/2" Width: 3" Thickness: 1" Weight: 6.00 lbs C/C: 5 1/2" or 140mm Our plate anodes are cut with specified bolt patterns...
Anodes mount to existing holes in trim tabs. The kit includes: two (2) anodes and four (4) stainless steel mounting screws. These are priced...
