Recommended products (Seguno)

Length: 7 3/4" Width: 3"Thickness: 1 3/8"Weight: 7.20 lbsCenter to Center: 10" OL: 11 3/4" Used in Feretti Yachts. All our zinc anodes are...

Thickness: 1 1/2"Diameter: 6"Weight: 5.50 lbs USED FOR: MANGUSTA/MAJORA/LEOPARD/UNIESSE/VICEM/AZIMUT/FERRETTI/RIVA/ CRANCHI/SUNSEEKER/ATLANTIC/SAN LORENZO/MONTE CARLO All our plate zinc anodes are cut as per dimensions . These...

DIAMETER: 40mm Weight: 3.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Length: 10 1/2" Width: 3" Thickness: 1" Weight: 6.00 lbs C/C: 5 1/2" or 140mm Our  plate  anodes are cut with specified bolt patterns...

Machined collar for Furuno System mx54.91mm Call for these New Anodes that are perfect for fishing Furuno

Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our  nut zinc anodes are precision machined...

DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...

Diameter: 2 3/4" Weight: 9.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Thickness: 3/4"Diameter: 2 25/32"Weight: 0.85 lbs Used in Azimut Yachts and TWIN DISC DRIVES. Very special rudder Zinc for Sunseeeker and European yachts. Recently...

Thickness: 1"Diameter: 8 3/4"Weight: 14.90 lbs Used in Azimut and Ferretti Yachts and in particular PERINI Navi , Feadship Whether your boat is sailing...

Length: 12" Width: 1 1/2" Thickness: 1/2" Weight: 2.35 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs...

Height: 2"Diameter: 2 7/8"Weight: 3.00 lbs #SM501180A These nut zinc anodes are precision machined to fit over specific nut configurations and models.Our zinc anodes...

Thickness: 1" Diameter: 3 15/32" Weight: 1.70 lbs Very special rudder Zinc for Sunseeeker and European yachts. Recently the best seller for Salt Water...

Length: 7 7/8"Width: 3 7/8"Thickness: 1 3/16"Weight: 8.10 lbsCenter to Center: 4 3/8" All plate zinc anodes are cut with specified bolt patterns as...

Diameter: 3" Weight: 7.90 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...

Thickness: 1" Diameter: 7 3/4" Weight: 11.50 lbs Used in Azimut and Ferretti Yachts. Whether your boat is sailing in either fresh or sea...

Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...

Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except JB,...

Zinc with Brass Cap Diameter: 1/4" Length: 2" NPT: 1/8 Wrench: 7/16"

E.B. - F.B. 55 HP - BRP (Omc / Johnson / Evinrude) Engine Anodes - Skeg zinc anode Length: 5.12” Width: 4.33” Thickness: 2.87”...

Length: 9 1/4" Width: 3 3/8" Thickness: 7/8" Weight: 3.60 lbs The A-26 is used on Ocean Yachts, Egg Harbor and many other fine...

DIAMETER: 50mm Weight: 3.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Length: 8 1/2" Width: 3" Thickness: 1 1/2" Weight: 5.00 lbs OL: 12 1/2 These TZG plate zinc anodes are cut as per dimensions...

Height: 4 5/8" Diameter: 6 1/8" Weight: 26.50 lbs Used in Feretti Yachts. These nut zinc anodes are precision machined to fit over specific...

Length: 7" Width: 1 15/16" Thickness: 1 1/2" Weight: 4.20 lbs Center to Center: 5"/130mm Arnesson drive bar for Pershing yachts Whether your boat...

Diameter: 4 1/2" Weight: 17.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Inside Diameter: 1 1/4" Outside Diameter: 2 1/2 Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...

Wesmar Bow Thruster Height: 2 1/16” Diameter: 1 11/16” 5/8" Wesmar prop nut 

Length: 6" 7/8Width: 3" 3/8Thickness: 7/8"Hole Dist: 4"Weight: 4 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions . These...

Height: 1 21/32" Diameter: 2 25/64" Weight: 1.10 lbs Vetus thruster Zinc anode Zinc anode for bow thruster models 125, 130 and 160. Mounting...

Diameter:  2" Height:  1-1/4" Weight:  0.60 lbs Fits Quick BTQ/BTR thrusters with 185mm diameter tunnel.  Sold individually. Most thrusters require two of these anodes.  Measures 20mm across...