Recommended products (Seguno)



This collection was generated by the Seguno app for use in email marketing and is not available on any sales channels. By default, it is configured to show your best-selling products that are in stock and not free.
$69.99$54.50
Length Overall: 16" Length of Anode: 12" Width: 3" Thickness: 1-1/4" Steel Tabs: 2" x 1-1/4" (nominal) Weight: 5 lbs Aluminum strap 1-1/4" wide runs end-to-end through the anode and...
Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches
Diameter (top of cone): 1 inchHeight: 1.5 inches
Fits VF108 and VF120 / 3-blade and 4-blade propellers. Anode threads onto the anode holder at the aft end of the propeller. Weight: 0.8...
Diameter: 3 inches Thickness: .75 inches Weight: 1/2 lb All our plate zinc anodes are cut as per dimensions . These r plate boat...
Length: 4 3/8" Width: 1 3/4" Thickness: 15/16" Weight: 1.35 lbs Center to Center: 5 1/2" Used in Submarine applications and water pumps in...
Wesmar Bow Thruster Height: 2 1/16” Diameter: 2”
3/4" Wesmar zinc only
Volvo Penta collar for folding propeller/sailing boat
Diameter: 4" Thickness: 1" Hole Diameter: 1/2" Weight: 0.8 Kilo The HD256A is installed on swim platforms/ trim tabs of Sunseeker, Fairline and other fine...
Replaces Z-406, B-12, B-14, SR-12 Used as a transom anode on many yachts. For use in all types of water:salt, brackish and freshwater. Weight:...
Weight: 1.06 lbs
Fits all Flexofold 2-blade closed propellers. 3-blade propellers. 4-blade up to 23".
Alpha one. Bravo and Verado Threaded hole. Where used: Kitalphaonegen2. - Kitbravo01. - Kitbravo 2-3 - Kitbravo 3 - 04 Kiterado4. - Kitverado6 Diameter:...
Diameter: 5 inches Thickness: 1 1/8 inches Weight: 3.50 All our plate zinc anodes are cut as per dimensions . These plate boat zincs...
Various outboards from 40HP to V6 135/150/175 Verado - Mercury Engine Anodes -
Length: 7.68” Width: 2.05” Thickness: .47” - Weight: 1.477 lbs
Length: 7 1/2"Width: 3"Thickness: 1 1/4"Weight: 6.30 lbs C/C: 3" HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans All plate zinc anodes are...
Diameter: 1 1/4" Length : 24" Weight: 7.50 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Diameter: 1" Length : 24" Weight: 4.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Length: 24" Width: 2" Thickness: 1/2" Weight: 5.85 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Length: 4 1/2" Width: 2 7/8"Thickness: 1 1/8"Weight: 3.10 lbsOL: 8 3/8" These Weld on plate zinc anodes are cut as per dimensions with galvanized...
Thickness: 13/16"Diameter: 6 1/2"Weight: 4.85 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
DIAMETER: 110mm Weight: 18.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
DIAMETER: 75mm Weight: 8.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Diameter: 1 1/8" Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Kit for 250-300 mm diameter tunnel thruster PAIR
Zinc with Brass Cap Diameter: 3/4" Length: 2"NPT: 3/4 Wrench:1 1/16"
Hull plate Aluminum Anode
Length: 6 1/4”Width: 2-7/8"Thickness: 3/4"Hole Distance: 2-7/8" center-to-centerHole Size: 1/2" x 7/8"Weight: 1.0 lbs
All Navalloy Aluminum shaft anodes have interlocking halves and extra alloy around the fastener. Stainless steel nuts are pressed in, and plastic retaining washers ensure...
WESTPORT 112
Diameter: 6 inches
Height: 5.75 inches
Weight: 28.60
35HP and above - Mercury Engine Anodes - trim tabs
Length: 3.74” Width: 3.74” Thickness: 2.60” - Weight: 1.003 lbs
Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...
Length: 9" Width: 3 3/8" Thickness: 7/8" Weight: 4.00 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Height: 3 1/2" Diameter: 7 7/8" Weight: 22 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water...
