No products in the cart.
Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Sale
Diameter Outside: 85mm, Inside 60mmHeight: 100mmWeight: 7.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards...
Sale
Length: 19"Width: 3 1/4"Thickness: 1 3/4"C/C: 6 1/4"Weight: 25lbs for Benetti Yachts. Whether your boat is sailing in either fresh or sea...
Sale
Length: 14"Width: 6 1/2"Thickness: 1 1/8"Weight: 19.80 lbsCenter to Center: 5" SEA RAY Transom Zinc Anode. Whether your boat is sailing in either fresh...
Sale
DIAMETER: 85mm Weight: 10.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Length: 17 5/8” Width: 3 3/4” Thickness 1 5/8” C/C: 9” hole 5/8" x1" Weight: 4.5Lbs Transom, hull Aluminum Anode used on Sunseekeer and...
Sale
Inside Diameter: 6 1/2" Outside Diameter: 7 1/2" Height: 7 1/2" Weight: 30 FOR: WESTPORT 130L , 40 Meters Our propeller zinc anodes are cut as per...
Sale
Length: 21"Weight: 14.60 lbsCenter to Center: 15" All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs...
Sale
Length: 48" Width: 2" Thickness: 1/2" Weight: 11.9 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Sale
Length: 12" Width: 3" Thickness: 1/2" Weight: 4.70 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...
Sale
Length: 12" 1/8Width: 3"Thickness: 1" 1/4Weight: 11.23 lbs All plate zinc anodes are cut as per dimensions . Theseplate boat zincs are undrilled for...
Sale
Length: 14 1/4" Width: 5 7/8"Thickness: 2"Weight: 33.00 lbsOL: 18 3/4" These Weld on plate zinc anodes are cut as per dimensions with galvanized...
Sale
Length: 11 5/8"
Width: 4 1/8"
Thickness: 1 9/16"
Weight: 16.50 lbs
OL: 15 3/4"
Sale
Inside Diameter: 6" Outside Diameter: 7.06" Height: 6 3/8" Weight: 22 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Height: 2 9/16" Dimension: 1 7/8" Weight: 1.20 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
DIAMETER: 100mm Weight: 12.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Length: 12" Thickness: 1 1/4" Width: 6 1/2" OW: 10" Weight: 20lbs Our plate zinc anodes are cut with specified bolt patterns as per dimensions ....
Sale
Rudders and Trim tabs/ Small Plate
Weight: 1.17lb
Length: 3.35"
C/C: 2"
Sale
Zinc anode that prevents corrosion of your engine.
Length: 5.04" Width: 1.73" Thickness: 0.83"
Weight: 1.124 lbs
(2 for each engine)
Diameter: 165mm
Height: 91.5mm
Weight: 15 lbs
Used in San Lorenzo Yachts
Sale
Height: 2 7/8" Diameter: 7 7/8" Weight: 25.00 lbs
Used for propeller nut on San Lorenzo 95ft
Sale
Outboard Kit / Complete Aluminum Anode kit for Mercruiser Bravo II & III Sterndrives. Fits 1988 and newer Bravo II drives and 1995-2003 Bravo...
Sale
Height: 3” Weight: 9.0Dimension: 4 7/16” C/C: 3 7/16"
Sale
Height: 3 1/2" Diameter: 2 7/8"Weight: 4.80 lbs USED FOR: FERRETTI/RIVA 50,52,56 All CONE zinc anodes are cut as per dimensions . These boat...
Sale
Diameter: 4" Length : 24" Weight: 77.80lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards...
Sale
Diameter: 5/8" Length : 24" Weight: 1.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Length: 14"Width: 6 1/2"Thickness: 1 1/4"Weight: 23.00 lbsOW: 10" These Zimar plate zinc anodes are cut as per dimensions with galvanized steel mounting strips...
Sale
Length: 13 1/2" Width: 4 3/4"Thickness: 1 5/8"Weight: 23.00 lbsOL: 17 3/4" These Weld on plate zinc anodes are cut as per dimensions with galvanized...
Sale
Length: 12" Width: 6 1/2"Thickness: 1"Weight: 18.20 lbs C/C: 5" Used in Ferretti Yachts. All plate zinc anodes are cut with specified bolt patterns as...
Sale
Height: 3 9/16" Diameter: 6 1/8"Weight: 25.00 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over specific...
Sale
Length: 6" Width: 1 1/4" Thickness: 1 1/8" Weight: 1.80 lbs Center to Center: 3 1/2" Whether your boat is sailing in either fresh...
Sale
DIAMETER: 65mm Weight: 5.70 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
About Us
