No products in the cart.
Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
DIAMETER: 55mm Weight: 5.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 3/4" Weight: 1.30 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Inside Diameter: 1 3/8" Outside Diameter: 3"Weight: 1.75 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Sale
Length: 16"Width: 5"Thickness: 2" Center to center Mounting holes 240mm / 9.45" Nominal Weight (ZN): 41lbs Core: 2 1/2"x12x1/4" (ASTM-A36) Tolerance: +1/8" ALUMINUM and or...
Sale
Zinc prevents corrosion on your boat's engines and propellers. Make sure to maintenance your boat every 3 through 6 months. Requires 4 for each...
Sale
Length: 6 1/4” Width: 5 7/8” Thickness: 1/2” 5 Holes/Mercury Zeus pod trim tab anode
Sale
Kit for Volvo Penta 290 DP drives 745 (VP-733BIS+VP737)
Sale
Kit 746 for Volvo Penta 290 DP drives DPH/DPR (VP733+VP-735)
Sale
Outboard Kit / Aluminum Anode Kit 880653A Manifold Aluminum Anode 892227A Trim Cylinder Aluminum Anode(Qty 4) 826134A Wedge Aluminum Anode(Qty 2) 76214-5A Flat Trim...
Sale
Diameter: 1 1/4"Height: 3/4"Weight: 0.22 lbs USED FOR: SEA REX All plate zinc anodes are cut as per dimensions . These plate boat zincs...
Sale
Diameter: 2" Length : 24" Weight: 20.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Length: 1"Weight: 6.80 lbsCenter to Center: 5" All plate zinc anodes are cut with specified bolt patterns as per dimensions . These plate boat zincs...
Sale
Length: 12" 1/8 Weight: 6" Thickness: 1" Weight: 18.2 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Sale
Length: 8 5/8" Width: 3 1/4" Thickness: 1 5/8" Weight: 4.05 lbs All plate zinc anodes are cut as per dimensions . These Zimar...
Length: 3 1/4" Width: 2 3/4" Thickness: 1/2" Weight: 1.06 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate...
Sale
Length: 18"Width: 4"Thickness: 1 3/8"Weight: 18.00 lbsCenter to Center: 7 1/4 - 9 1/4" Used in Sealine Yachts. All late zinc anodes are cut...
Sale
DIAMETER: 45mm Weight: 2.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Inner-Diameter: 7/8" Weight: 1.2 LBS Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 3" Weight: 6.00 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 140mm Thickness: 1 1/2 inches Weight: 5 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...
Sale
Special Propeller Zinc Anode FOR SAN LORENZO YACHTS.
Diameter: 152mm
Height: 92mm
Weight: 15 lbs
Sale
Yamaha 200-300 HP Outboard Fin/Skeg STANDARD Base Diameter: 4” Threaded Mounting Hole: M10 x 1.25mm 61A-45371-00 Yamaha 200-300 HP Outboard Trim Tab Zinc Anode...
Sale
Length: 8 1/4"Width: 2 3/4"Thickness: 1"Weight: 5.00 lbsCenter to Center: 3 1/8" or 80mm USED FOR: MONTE CARLO All THIS SPECIAL zinc anodes are...
Sale
Length: 6” Width: 4” Thickness: 1/2” Slot Width: 1 1/4” to 4 1/4” Slot Height: 3/8”
Sale
Kit for 140 mm diameter tunnel thruster
#1080/589150
Sale
Diameter: 5 3/4" Inside Diameter :128mmThickness: 2"Weight: 11.00 lbs USED FOR: BENETTI 93' Out plate zinc anodes are cut as per dimensions . These...
Sale
Center to Center: 1 3/4" Height: 1 3/8" Diameter: 2 5/8" Weight: 1.60 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc...
Sale
Inside Diameter: 5" Outside Diameter: 6.5" Height: 5.5" Weight: 18.25 lbs Used in Westport Yachts. Whether your boat is sailing in either fresh or sea water is...
Sale
Diameter: 1 3/4" Length : 24" Weight: 14.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Sale
Length: 6" OL: 10"Width: 6"Thickness: 1 1/4"Weight: 11.20 lbs These WELD ON plate zinc anodes are cut as per dimensions with galvanized steel mounting strips...
Sale
Length: 12"Weight: 7.80 lbsCenter to Center: 6" Used for Azimut and Atlantis yachts All plate zinc anodes are cut with specified bolt patterns as per...
Sale
Length: 16" Width: 3" Thickness: 1/2" Weight: 6.00 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...
About Us
