No products in the cart.
Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar collar zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Sale
Zinc with Brass Cap Diameter: 1/2” Length:2" NPT:3/8 Wrench: 11/16"
Sale
Length: 12 1/8" Width: 3" Thickness: 1 1/4" Weight: 11.57 lbs Center to Center: 14 3/8" OL: 16" with Slotted Strap. These plate zinc...
Sale
Zinc with Brass Cap Diameter: 3/8” Length:1 3/4" NPT:1/4 Wrench: 9/16"
Sale
Diameter: 5 1/16" Weight: 5.10 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Sale
Diameter: 2 15/16" Weight: 0.48 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Height: 29/32" Diameter: 1 3/4" Weight: 0.35 lbs Used in Azimut and Ferretti Yachts Side Power Thrusters. These nut zinc anodes are precision machined...
Sale
Length: 12" Width: 2" Thickness: 1/2" Weight: 2.95 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...
Sale
Length: 12" Width: 6" Thickness: 1" 1/4" Weight: 22.50 lbs OW: 10" ZHS 23 VOLUME DISCOUNTS Significant volume discounts are available for this anode....
Sale
Length: 3 3/4" Width: 2 3/4" Thickness: 9/16" Weight: 0.55 lbs Center to Center: 1 5/16 Boat Lift Zinc bolt on Anode: This hull...
Sale
Length: 17 5/8” Width: 3 3/4” Thickness: 2 1/8” C/C: 9” (230mm) hole size 5.8" x1" Weight:27lbs Transom, hull Zinc Anode used on Sunseekeer...
Sale
Length: 12” Width: 3” Thickness: 1 1/2” C/C: 8”, hole 5/8" x1" Weight: 9lbs Used on Sunseekeer and Princess Yachts,Feadship, Oyster Sailboats, Fairline(same as...
Sale
Small Tear Drop Zinc Anode w/custom slotLength: 3 1/2” Width: 1 3/4” Thickness: 1/2” C/C: 1 5/16” Hole Diameter: 1/4”
Sale
Diameter: 3 1/2" Weight: 9.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Outboard Kit / Aluminum Anode Kit 76214-4A Mercruiser Flat Trim Tab Aluminum Anode (no threads) 76214-5A Mercury/Mercruiser Flat Trim Tab Aluminum Anode 821630A Mercruiser...
Sale
Diameter: 1" Height: 1 1/4" Weight: 0.22 lbs H.E. PLUG1/ #178369AM Heat exchanger zinc anode Marine transmission solution TWIN DISC/COOLING SYSTEM P/N 163760 Used...
Sale
Length: 8 1/4"Width: 3 15/16"Thickness: 1 1/4"Weight: 8.33 lbsC/C: 4" All of our plate zinc anodes are cut with specified bolt patterns as per...
Sale
Diameter: 1 7/8" Weight: 0.25 lbs Used in Azimut Yachts Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Sale
Diameter: 2 1/4" Weight: 5.15 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Swim Platform Zinc Anode (OPACMARE)
LENGTH: 5.12” WIDTH:1.97” HEIGHT: 0.67”
Weight: 2.4 LBS
CENTER TO CENTER HOLES: 3.03”
HOLES: 0.28”
Sale
Diameter: 1 15/16" Height: 2 3/4" Weight: 1.80 lbs Used for Volvo Penta IPS drive foot Whether your boat is sailing in either fresh...
Sale
Anodes mount to existing holes in trim tabs. The kit includes: two (2) anodes and four (4) stainless steel mounting screws. These are priced...
Sale
Diameter: 4" Weight: 12.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Length: 7 3/4" Width: 2 1/2" Thickness: 1 1/4" Weight: 5.20 lbs Center to Center: 9" OL: 11" Used in Feretti Yachts. All Zimar plate...
Sale
Length: 7 3/4" Width: 3" Thickness: 1 3/8" Weight: 7.20 lbs Center to Center: 10" OL: 11 3/4" Used in Feretti Yachts. All Zimar...
Sale
Diameter: 6 1/2" Weight: 9.70 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water is inevitably exposed...
Sale
Length: 12" Width: 1 1/2" Thickness: 1/2" Weight: 2.35 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs...
Sale
Thickness: 1" Diameter: 3 15/32" Weight: 1.70 lbs Very special rudder Zinc for Sunseeeker and European yachts. Recently the best seller for Salt Water...
Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models: F115 & LF115 4-Stroke - All Models (except...
Sale
Height: 2 9/32" Diameter: 2 21/32" Weight: 2.10 lbs Used in Azimut, Pershing and Sunseekeer yachts These Our nut zinc anodes are precision machined...
Sale
DIAMETER: 60mm Weight: 6.40 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Sale
DIAMETER: 40mm Weight: 3.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
About Us
