Zinc Anodes



All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar collar zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Volvo Penta Split Ring Zinc Anode Outside Diameter: 4 Inside Diameter: 1-3/4" Outside Diameter: 4"Weight: 3.4 lbs Mounting hardware not included This anode fits the following saildrive models:...
Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...
DIAMETER: 95mm Weight: 13.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
DIAMETER: 80mm Weight: 7.20 lbs Used in Feretti Yachts. Whether your Feretti yacht is sailing in either fresh or sea water is inevitably exposed...
Diameter: 4 1/2" Weight: 17.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Diameter: 2" Weight: 2.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Diameter: 1 1/2" Weight: 1.70 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Diameter: 1" Weight: 1.20 lbs Inside Diameter: 1” Outside Diameter: 2 1/2” Thickness:1 1/4” Whether your boat is sailing in either fresh or sea...
Fits VF108 and VF120 / 3-blade and 4-blade propellers. Anode threads onto the anode holder at the aft end of the propeller. Weight: 0.8...
Wesmar Bow Thruster Height: 2 1/16” Diameter: 2”
3/4" Wesmar zinc only
Volvo Penta collar for folding propeller/sailing boat
Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches
Diameter (top of cone): 1 inchHeight: 1.5 inches
Length: 8 1/2" Width: 2 3/4"Thickness: 1 1/2"Weight: 6.60 lbsOL: 11 1/2" c/c: 10" These Zimar plate zinc anodes are cut as per dimensions...
Kit for 250-300 mm diameter tunnel thruster PAIR
Zinc with Brass Cap Diameter: 3/4" Length: 2"NPT: 3/4 Wrench:1 1/16"
Diameter: 1 1/4" Length : 24" Weight: 7.50 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to...
Diameter: 1" Length : 24" Weight: 4.80 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Length: 16" Weight: 10.80 lbs Center to Center: 10" All Zimar plate zinc anodes are cut with specified bolt patterns as per dimensions ....
Length: 24" Width: 2" Thickness: 1/2" Weight: 5.85 lbs All Zimar plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Length: 4 1/2" Width: 2 7/8" Thickness: 1 1/8" Weight: 3.10 lbs OL: 8 3/8" These Zimar plate zinc anodes are cut as per...
Length: 4 3/8" Width: 1 3/4" Thickness: 15/16" Weight: 1.35 lbs Center to Center: 5 1/2" Used in Submarine applications and water pumps in...
DIAMETER: 30mm Weight: 1.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
S/S A2-70 Bolt Socket Head Cap Screw
Application: VT-1, SP-2, Vetus, Thrusters, Side power
Length: 7 1/2" Width: 3" Thickness: 1 1/4" Weight: 6.30 lbs C/C: 3" HOLE SIZE:11/16" or 17.462mm USED FOR: RIVA/AZIMUT and catamarans All Zimar...
Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...
Length: 9" Width: 3 3/8" Thickness: 7/8" Weight: 4.00 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Thickness: 13/16" Diameter: 6 1/2" Weight: 4.85 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...
Height: 3 1/2" Diameter: 7 7/8" Weight: 22 lbs Used in Azimut Yachts. Whether your boat is sailing in either fresh or sea water...
Alpha one. Bravo and Verado Threaded hole. Where used: Kitalphaonegen2. - Kitbravo01. - Kitbravo 2-3 - Kitbravo 3 - 04 Kiterado4. - Kitverado6 Diameter:...
Length: 2 5/8" Width: 2 1/4" Weight: 1.00 lbs Center to Center: 2" USED FOR: PERSHING/SEA REX All Zimar plate zinc anodes are cut...
