Products

Hole Diameter: 10mm Length:  30mm

Length: 8 5/8" Width: 4 1/4" Thickness: 1 1/8" Weight: 8.00 lbs Center to Center: 5" Whether your boat is sailing in either fresh...

Stainless Steel Complete Bolts, Washers and Nut set

Length: 12" Width: 1 1/2" Thickness: 1/2" Weight: 2.35 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs...

Length: 12" Width: 2" Thickness: 1/2" Weight: 2.95 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...

Length: 3 1/4" Width: 2 3/4" Thickness: 1/2" Weight: 1.06 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate...

Length: 9" Width: 3 3/8" Thickness: 7/8" Weight: 4.00 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...

Length: 9 1/4" Width: 3 3/8" Thickness: 7/8" Weight: 3.60 lbs The A-26 is used on Ocean Yachts, Egg Harbor and many other fine...

Length: 12" Width: 3" Thickness: 1/2" Weight: 4.70 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Length: 16" Width: 3" Thickness: 1/2" Weight: 6.00 lbs All plate zinc anodes are cut as per dimensions . These plate boat zincs are...

Length: 6 1/4" Width: 2 3/4" Thickness: 9/16" Weight: 2.33 lbs All plate zinc anodes are cut with specified bolt patterns as per dimensions...

Replaces A-30, M-30 Navalloy aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt,...

Length: 8 5/8" Width: 3 1/4" Thickness: 1 5/8" Weight: 4.05 lbs All plate zinc anodes are cut as per dimensions . These Zimar...

Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...

Length: 12" Width: 6" Thickness: 5/8" Weight: 11.85 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...

Length: 6" Width: 6" Thickness: 1/2" Weight: 4.70 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs...

Either Forerunner or Jaw and Jaw from 5/8" chain size starting price here They all have a common link each end to up to 102...

Length: 6" Width: 1 1/4" Thickness: 1 1/8" Weight: 1.80 lbs Center to Center: 3 1/2" Whether your boat is sailing in either fresh...

Length: 7" Width: 1 15/16" Thickness: 1 1/2" Weight: 4.20 lbs Center to Center: 5"/130mm Arnesson drive bar for Pershing yachts Whether your boat...

Length: 3 3/4" Height: 3 3/4" Dimension: 95mm x95mm Width: 5.60 lbs Used For: AZIMUT (70, 72) All plate zinc anodes are cut as...

Bow/Stern Thruster 25mm Diameter (side shown in picture): 1.25 inches Diameter (top of cone): 1 inchHeight: 1.5 inches

Bow/Stern Thruster 30mm Dimension: 1 5/8” Height: 2 1/8” Used for CMC Thrusters .

Height: 2 3/8" Dimension: 1 7/8" Weight: .80 lbs USED FOR: AZIMUT/CRANCHI All cone zinc anodes are cut as per dimensions . These cone...

Height: 2 5/8" Dimension: 2 1/8" Weight: 1.00 lbs USED FOR: AZIMUT/CRANCHI/ATLANTIS All cone zinc anodes are cut as per dimensions . These cone...

Height: 2 7/8" Dimension: 2 3/8" Weight: 1.80 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...

Height: 3 1/4" Dimension: 2 7/8" Weight: 2.65 lbs Used on Azimut yachts. Our nut zinc anodes are precision machined to fit over specific...

Diameter: 3" (72mm) Height: 3 3/8" (87mm) Weight: 2.20 lbs For Azimut 45' powered with Cummings These nut zinc anodes are precision machined to...

Height: 5 1/2"  Bottom Diameter: 3 1/2" Top Diameter: 2 1/2"  For Azimut yachts 

Diameter: 3 1/4" Height: 3 7/8" Weight: 4.25 lbs Used in Azimut Yachts, Atlantis, Cranchi. Our nut zinc anodes are precision machined to fit...

PROP NUT Weight:  12lbs Inside Height: 60mm I/D:  85mmO/D:  120mm

Height: 1 3/4" Dimension: 3 1/8" Weight: 6.90 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc anodes are cut as per...

Height: 3”  Weight: 9.0Dimension: 4 7/16” C/C: 3 7/16"